Customs Tariff Amendment Act (No. 2) 1987

No. 147 of 1987

An Act to amend the Customs Tariff Act 1987

[Assented to 26 December 1987]

BE IT ENACTED by the Queen, and the Senate and the House of Representatives of the Commonwealth of Australia, as follows:

Short title etc.

1 1

1. (1) This Act may be cited as the Customs Tariff Amendment Act (No. 2) 1987.

 2

(2) In this Act, “Principal Act” means the Customs Tariff Act 19871.

Commencement

2 1

2. (1) Sections 1, 2 and 4 shall come into operation on the day on which this Act receives the Royal Assent.

 2

(2) Sections 3 and 5 shall come into operation on the commencement of the Principal Act.
3 Indexation of rates of duty

3. Section 26 of the Principal Act is amended by omitting the table set out in subsection (1) and substituting the following table:

“TABLE
Column 1 Column 2 Column 1 Column 2
Customs Excise Customs Excise
subheading item subheading item
2203.00.11 1 (C) 2208.90.10 2 (H) (1)
2203.00.19 1 (D) 2208.90.90 2 (H) (1)
2207.10.00 2 (O) 2402.10.00 7
2207.20.00 2 (O) 2402.20.00 8
2208.20.11 2 (A) 2403.10.10 8
2208.20.19 2 (A) 2403.10.90 6
2208.20.91 2 (H) (1) 2403.99.20 9
2208.20.99 2 (H) (1) 2403.99.90 6
2208.30.10 2 (D) 2707.50.10 11 (B) (3)
2208.30.90 2 (D) 2710.00.20 11 (E) (2)
2208.40.10 2 (F) 2710.00.30 11 (E) (3)
2208.40.90 2 (F) 2710.00.40 11 (D)
2208.50.10 2 (H) (1) 2710.00.51 11 (A) (3) (a)
2208.50.90 2 (H) (1) 2710.00.52 11 (A) (3) (b)”.
4 Repeal

4. Section 28 of the Principal Act is amended by omitting subsection (1) and substituting the following subsection:

“(1) Each of the Acts referred to in Schedule 6, and any Act passed in 1987, to the extent only that it amends an Act so referred to, is repealed.”.
5 Amendments of Schedules

5. The Principal Act is further amended as set out in the Schedule.

SCHEDULE Section 5

AMENDMENTS HAVING EFFECT FROM THE COMMENCEMENT OF THE PRINCIPAL ACT
1 Amendments of Schedule 3

Omit 0406.10.00 to 0406.90, substitute:
“0406.10.00 - Fresh cheese (including whey cheese), not fermented, and curd Sch.5
0406.20.00 - Grated or powdered cheese, of all kinds Sch.5
0406.30.00 - Processed cheese, not grated or powdered Sch.5
0406.40 - Blue-veined cheese:
0406.40.10 - - - Cheese, of the following types: Free
(a) roquefort;
(b) stilton
0406.40.90 - - - Other Sch.5
SCHEDULE—continued
0406.90 - Other cheese:
0406.90.10 - - - Cheese, of the following types: Free
(a) made wholly from goats’ milk, other than fetta or kasseri; (b) surface-ripened soft, having: (i) a fat content in the dry matter of not less than 50% by weight; and (ii) a moisture content of not less than 65% by weight of the non-fatty matter
(a) made wholly from goats’ milk, other than fetta or kasseri; (b) surface-ripened soft, having: (i) a fat content in the dry matter of not less than 50% by weight; and (ii) a moisture content of not less than 65% by weight of the non-fatty matter
(a) made wholly from goats’ milk, other than fetta or kasseri; (b) surface-ripened soft, having: (i) a fat content in the dry matter of not less than 50% by weight; and (ii) a moisture content of not less than 65% by weight of the non-fatty matter
(a) made wholly from goats’ milk, other than fetta or kasseri; (b) surface-ripened soft, having: (i) a fat content in the dry matter of not less than 50% by weight; and (ii) a moisture content of not less than 65% by weight of the non-fatty matter
0406.90.90 - - - Other Sch.5”.
2. Omit 0701 to 0709, substitute: Omit 0701 to 0709, substitute:
“0701 POTATOES, FRESH OR CHILLED:
0701.10.00 - Seed Free
0701.90.00 - Other Free
0702.00.00 TOMATOES, FRESH OR CHILLED Free
0703 ONIONS, SHALLOTS, GARLIC, LEEKS AND OTHER ALLIACEOUS VEGETABLES, FRESH OR CHILLED:
ONIONS, SHALLOTS, GARLIC, LEEKS AND OTHER ALLIACEOUS VEGETABLES, FRESH OR CHILLED:
0703.10.00 - Onions and shallots Free
0703.20.00 - Garlic Free
0703.90.00 - Leeks and other alliaceous vegetables Free
0704 CABBAGES. CAULIFLOWERS, KOHLRABI, KALE AND SIMILAR EDIBLE BRASSICAS, FRESH OR CHILLED:
CABBAGES. CAULIFLOWERS, KOHLRABI, KALE AND SIMILAR EDIBLE BRASSICAS, FRESH OR CHILLED:
0704.10.00 - Cauliflowers and headed broccoli Free
0704.20.00 - Brussels sprouts Free
0704.90.00 - Other Free
0705 LETTUCE (Lactuca sativa) AND CHICORY (Cichorium spp.), FRESH OR CHILLED:
0705.1 - Lettuce:
0705.11.00 - - Cabbage lettuce (head lettuce) Free
0705.19.00 - - Other Free
0705.2 - Chicory:
0705.21.00 - - Witloof chicory (Cichorium intybus var. foliosum) Free
0705.29.00 - - Other Free
0706 CARROTS, TURNIPS, SALAD BEETROOT, SALSIFY, CELERIAC, RADISHES AND SIMILAR EDIBLE ROOTS, FRESH OR CHILLED:
CARROTS, TURNIPS, SALAD BEETROOT, SALSIFY, CELERIAC, RADISHES AND SIMILAR EDIBLE ROOTS, FRESH OR CHILLED:
0706.10.00 - Carrots and turnips Free
0706.90.00 - Other Free
0707.00.00 CUCUMBERS AND GHERKINS, FRESH OR CHILLED LEGUMINOUS VEGETABLES, SHELLED OR UNSHELLED. FRESH OR CHILLED: Free
0708 CUCUMBERS AND GHERKINS, FRESH OR CHILLED LEGUMINOUS VEGETABLES, SHELLED OR UNSHELLED. FRESH OR CHILLED:
0708.10.00 - Peas (Pisum sativum) Free
0708.20.00 - Beans (Vigna spp., Phaseolus spp.) Free
0708.90.00 - Other leguminous vegetables Free
0709 OTHER VEGETABLES, FRESH OR CHILLED:
0709.10.00 - Globe artichokes Free
0709.20.00 - Asparagus Free
0709.30.00 - Aubergines (egg-plants) Free
0709.40.00 - Celery other than celeriac Free
0709.5 - Mushrooms and truffles:
0709.51.00 - - Mushrooms 15%
DC:10%
From 1 January 1989 10%
DC:5%
0709.52.00 - - Truffles 15%
DC: 10%
From 1 January 1989 10%
DC:5%
0709.60.00 - Fruits of the genus Capsicum or of the genus Pimenta Free
0709.70.00 - Spinach, New Zealand spinach and orache spinach (garden spinach) Free
0709.90.00 - Other Free”.
3. Omit 0710.29.00, substitute: Omit 0710.29.00, substitute:
“0710.29.00 - - Other Free”.
4. Omit 0710.30.00, substitute: Omit 0710.30.00, substitute:
“0710.30.00 - Spinach, New Zealand spinach and orache spinach (garden spinach) Free”.
SCHEDULE—continued
5. Omit 0710.80, substitute: 5. Omit 0710.80, substitute:
“0710.80 - Other vegetables:
0710.80.10 - - - Mushrooms 15%
DC: 10%
From 1 January 1989 10%
DC: 5%
0710.80.20 - - - Goods, as follows: 10%
(a) olives; DC: 5%
(b) truffles
0710.80.90 - - - Other Free”.
6. Omit 0711 to 0713, substitute: 6. Omit 0711 to 0713, substitute:
“0711 VEGETABLES PROVISIONALLY PRESERVED (FOR EXAMPLE, BY SULPHUR DIOXIDE GAS, IN BRINE, IN SULPHUR WATER OR IN OTHER PRESERVATIVE SOLUTIONS), BUT UNSUITABLE IN THAT STATE FOR IMMEDIATE CONSUMPTION:
VEGETABLES PROVISIONALLY PRESERVED (FOR EXAMPLE, BY SULPHUR DIOXIDE GAS, IN BRINE, IN SULPHUR WATER OR IN OTHER PRESERVATIVE SOLUTIONS), BUT UNSUITABLE IN THAT STATE FOR IMMEDIATE CONSUMPTION:
VEGETABLES PROVISIONALLY PRESERVED (FOR EXAMPLE, BY SULPHUR DIOXIDE GAS, IN BRINE, IN SULPHUR WATER OR IN OTHER PRESERVATIVE SOLUTIONS), BUT UNSUITABLE IN THAT STATE FOR IMMEDIATE CONSUMPTION:
0711.10.00 - Onions Free
0711.20.00 - Olives Free
0711.30.00 - Capers Free
0711.40.00 - Cucumbers and gherkins Free
0711.90.00 - Other vegetables; mixtures of vegetables Free
0712 DRIED VEGETABLES, WHOLE, CUT. SLICED, BROKEN OR IN POWDER. BUT NOT FURTHER PREPARED:
DRIED VEGETABLES, WHOLE, CUT. SLICED, BROKEN OR IN POWDER. BUT NOT FURTHER PREPARED:
0712.10.00 - Potatoes whether or not cut or sliced but not further prepared 40%
DC: 35%
From 1 January 1989 35%
DC: 30%
From 1 January 1990 30%
DC: 25%
From 1 January 1991 25%
DC: 20%
From 1 January 1992 20%
DC: 15%
From 1 January 1993 15%
DC: 10%
From 1 January 1994 10%
DC: 5%
0712.20.00 - Onions $0.42/kg
DC: $0.42/kg.
less 5%
0712.30 - Mushrooms and truffles:
0712.30.10 - - - Mushrooms 15%
DC: 10%
From 1 January 1989 10%
DC: 5%
0712.30.20 - - - Truffles 10%
DC: 5%
0712.90 - Other vegetables; mixtures of vegetables:
0712.90.10 - - - Potatoes 40%
DC: 35%
From 1 January 1989 35%
DC: 30%
From 1 January 1990 30%
DC: 25%
From 1 January 1991 25%
DC: 20%
From 1 January 1992 20%
DC: 15%
From 1 January 1993 15%
DC: 10%
From 1 January 1994 10%
DC: 5%
0712.90.20 - - - Herbs in packs of 500 g or more Free
0712.90.30 - - - Goods, as follows: 10%
(a) herbs, NSA; DC: 5%
(b) sweet corn;
(c) tomatoes;
(d) mixtures of vegetables
0712.90.90 - - - Other $0.40/kg
DC: $0.40/kg.
less 5%

SCHEDULE—continued
0713 DRIED LEGUMINOUS VEGETABLES. SHELLED, WHETHER OR NOT SKINNED OR SPLIT: DRIED LEGUMINOUS VEGETABLES. SHELLED, WHETHER OR NOT SKINNED OR SPLIT:
DRIED LEGUMINOUS VEGETABLES. SHELLED, WHETHER OR NOT SKINNED OR SPLIT: DRIED LEGUMINOUS VEGETABLES. SHELLED, WHETHER OR NOT SKINNED OR SPLIT:
0713.10.00 - Peas (Pisum sativum) - Peas (Pisum sativum) 2%
0713.20.00 - Chickpeas (garbanzos) - Chickpeas (garbanzos) 2%
0713.3 - Beans (Vigna spp., Phaseolus spp.): - Beans (Vigna spp., Phaseolus spp.):
0713.31.00 - - Beans of the species Vigna mungo (L) Hepper or Vigna radiata (L.) Wilezek - - Beans of the species Vigna mungo (L) Hepper or Vigna radiata (L.) Wilezek 2%
0713.32.00 - - Small red (Adzuki) beans (Phaseolus or Vigna angularis) - - Small red (Adzuki) beans (Phaseolus or Vigna angularis) 2%
0713.33 - - Kidney beans, including white pea beans (Phaseolus vulgaris): - - Kidney beans, including white pea beans (Phaseolus vulgaris):
0713.33.10 - - - For cultivation - - - For cultivation 2%
0713.33.90 - - - Other - - - Other 15%
DC. 10%
From 1 January 1989 From 1 January 1989 10%
DC: 5%
From 1 January 1990 From 1 January 1990 5%
From 1 January 1991 From 1 January 1991 2%
0713.39.00 - - Other - - Other 2%
0713.40.00 - Lentils - Lentils 2%
0713.50.00 - Broad beans (Vicia faba var. major) and horse beans (Vicia faba var. equina, Vicia faba var. minor) - Broad beans (Vicia faba var. major) and horse beans (Vicia faba var. equina, Vicia faba var. minor) 2%
- Broad beans (Vicia faba var. major) and horse beans (Vicia faba var. equina, Vicia faba var. minor) - Broad beans (Vicia faba var. major) and horse beans (Vicia faba var. equina, Vicia faba var. minor)
0713.90.00 - Other - Other 2%”.
7. Omit 1105, substitute: Omit 1105, substitute: Omit 1105, substitute:
“1105 FLOUR. MEAL AND FLAKES OF POTATOES: FLOUR. MEAL AND FLAKES OF POTATOES:
1105.10.00 - Flour and meal - Flour and meal 40%
DC: 35%
From 1 January 1989 From 1 January 1989 35%
DC: 30%
From 1 January 1990 From 1 January 1990 30%
DC: 25%
From 1 January 1991 From 1 January 1991 25%
DC: 20%
From 1 January 1992 From 1 January 1992 20%
DC: 15%
From 1 January 1993 From 1 January 1993 15%
DC: 10%
From 1 January 1994 From 1 January 1994 10%
DC: 5%
1105.20.00 - Flakes - Flakes 40%
DC: 35%
From 1 January 1989 From 1 January 1989 35%
DC: 30%
From 1 January 1990 From 1 January 1990 30%
DC: 25%
From 1 January 1991 From 1 January 1991 25%
DC: 20%
From 1 January 1992 From 1 January 1992 20%
DC: 15%
From 1 January 1993 From 1 January 1993 15%
DC: 10%
From 1 January 1994 From 1 January 1994 10%
DC: 5%”.
8. Omit 1108.13.00. substitute: Omit 1108.13.00. substitute: Omit 1108.13.00. substitute:
“1108.13.00 - - Potato starch - - Potato starch Free”.
9. Omit 2001 and 2002, substitute: Omit 2001 and 2002, substitute: Omit 2001 and 2002, substitute:
“2001 VEGETABLES. FRUIT. NUTS AND OTHER EDIBLE PARTS OF PLANTS. PREPARED OR PRESERVED BY VINEGAR OR ACETIC ACID: VEGETABLES. FRUIT. NUTS AND OTHER EDIBLE PARTS OF PLANTS. PREPARED OR PRESERVED BY VINEGAR OR ACETIC ACID:
VEGETABLES. FRUIT. NUTS AND OTHER EDIBLE PARTS OF PLANTS. PREPARED OR PRESERVED BY VINEGAR OR ACETIC ACID: VEGETABLES. FRUIT. NUTS AND OTHER EDIBLE PARTS OF PLANTS. PREPARED OR PRESERVED BY VINEGAR OR ACETIC ACID:
2001.10.00 - Cucumbers and gherkins $0.08/kg drained weight DC: $0.08/kg drained weight, less 5% CAN: $0.05/kg drained weight $0.08/kg drained weight DC: $0.08/kg drained weight, less 5% CAN: $0.05/kg drained weight

SCHEDULE—continued
2001.20.00 - Onions $0.05/kg drained weight DC: $0.05/kg drained weight, less 5% CAN: $0.02/kg drained weight
2001.90 - Other
2001.90.10 - - - Goods, as follows: 10%
(a) capers; DC: 5%
(b) olives
2001.90.90 - - - Other $0.05/kg drained weight DC: $0.05/kg drained weight, less 5%
2002 TOMATOES PREPARED OR PRESERVED OTHERWISE THAN BY VINEGAR OR ACETIC ACID:
TOMATOES PREPARED OR PRESERVED OTHERWISE THAN BY VINEGAR OR ACETIC ACID:
2002.10.00 - Tomatoes, whole or in pieces 20%
- Tomatoes, whole or in pieces DC: 15%
From 1 January 1992 15%
DC: 10%
From 1 January 1994 10%
DC: 5%
2002.90.00 - Other 25%
DC: 20%
From 1 January 1990 20%
DC: 15%
From 1 January 1992 15%
DC: 10%
From 1 January 1994 10%
DC: 5%”.
10. Omit 2004.90.00, substitute: Omit 2004.90.00, substitute:
“2004.90 - Other vegetables and mixtures of vegetables:
2004.90.10 - - - Goods, as follows: 10%
(a) beans; DC: 5%
(b) peas;
(c) mixtures of vegetables
2004.90.90 - - - Other Free”.
11. Omit 2005.10.00, substitute: Omit 2005.10.00, substitute:
“2005.10.00 - Homogenised vegetables 10%
DC: 5%
CAN: 7%”.
12. Omit 2005.30.00 and 2005.40.00, substitute: Omit 2005.30.00 and 2005.40.00, substitute:
“2005.30.00 - Sauerkraut 10%
DC: 5%
CAN: 7%
2005.40.00 - Peas (Pisum sativum) 10%
- Peas (Pisum sativum) DC: 5%
CAN: 7%”.
13. Omit 2005.60.00, substitute: Omit 2005.60.00, substitute:
“2005.60.00 - Asparagus 10%
DC: 5%
CAN: 7%”.
14. Omit 2005.90.00, substitute: Omit 2005.90.00, substitute:
“2005.90.00 - Other vegetables and mixtures of vegetables 10%
- Other vegetables and mixtures of vegetables DC: 5%
CAN: 7%”.
15. Omit 2106.90.00. substitute: Omit 2106.90.00. substitute:
“2106.90 - Other
2106.90.10 - - - Hydrolised protein 10%
DC: 5%
2106.90.90 - - - Other 5%”.

SCHEDULE—continued
16. Omit 2207.20.00, substitute: Omit 2207.20.00, substitute: Omit 2207.20.00, substitute:
“2207.20.00 “2207.20.00 - Ethyl alcohol and other spirits, denatured, of any strength - Ethyl alcohol and other spirits, denatured, of any strength 10%, and $26.38/L of alcohol PNG: $26.38/L of alcohol FI: $26.38/L of alcohol DC: 5%, and $26.38/L of alcohol”. 10%, and $26.38/L of alcohol PNG: $26.38/L of alcohol FI: $26.38/L of alcohol DC: 5%, and $26.38/L of alcohol”. 10%, and $26.38/L of alcohol PNG: $26.38/L of alcohol FI: $26.38/L of alcohol DC: 5%, and $26.38/L of alcohol”.
“2207.20.00 “2207.20.00 10%, and $26.38/L of alcohol PNG: $26.38/L of alcohol FI: $26.38/L of alcohol DC: 5%, and $26.38/L of alcohol”. 10%, and $26.38/L of alcohol PNG: $26.38/L of alcohol FI: $26.38/L of alcohol DC: 5%, and $26.38/L of alcohol”. 10%, and $26.38/L of alcohol PNG: $26.38/L of alcohol FI: $26.38/L of alcohol DC: 5%, and $26.38/L of alcohol”.
17. Omit 2710.00.31, substitute: Omit 2710.00.31, substitute: Omit 2710.00.31, substitute:
“2710.00.51 “2710.00.51 - - - - For use in aircraft - - - - For use in aircraft - - - - For use in aircraft $0.20870/L $0.20870/L
“2710.00.51 “2710.00.51 - - - - For use in aircraft - - - - For use in aircraft - - - - For use in aircraft NZ: $0.20870/L NZ: $0.20870/L
PNG: $0.20870/L PNG: $0.20870/L
FI: $0.20870/L FI: $0.20870/L
DC: $0.20870/L”. DC: $0.20870/L”.
18. Omit the Additional Note to Section VI. Omit the Additional Note to Section VI. Omit the Additional Note to Section VI.
19. Omit sub-note 2 (d) to Chapter 28, substitute: 19. Omit sub-note 2 (d) to Chapter 28, substitute: 19. Omit sub-note 2 (d) to Chapter 28, substitute: 19. Omit sub-note 2 (d) to Chapter 28, substitute:
“(d) “(d) Thiocarbonates, selenocarbonates, tellurocarbonates, selenocyanates, tellurocyanates, tetrathiocyanatodiamminochromates (reineckates) and other complex cyanates, of inorganic bases (2842);”. Thiocarbonates, selenocarbonates, tellurocarbonates, selenocyanates, tellurocyanates, tetrathiocyanatodiamminochromates (reineckates) and other complex cyanates, of inorganic bases (2842);”. Thiocarbonates, selenocarbonates, tellurocarbonates, selenocyanates, tellurocyanates, tetrathiocyanatodiamminochromates (reineckates) and other complex cyanates, of inorganic bases (2842);”. Thiocarbonates, selenocarbonates, tellurocarbonates, selenocyanates, tellurocyanates, tetrathiocyanatodiamminochromates (reineckates) and other complex cyanates, of inorganic bases (2842);”. Thiocarbonates, selenocarbonates, tellurocarbonates, selenocyanates, tellurocyanates, tetrathiocyanatodiamminochromates (reineckates) and other complex cyanates, of inorganic bases (2842);”.
“(d) “(d) Thiocarbonates, selenocarbonates, tellurocarbonates, selenocyanates, tellurocyanates, tetrathiocyanatodiamminochromates (reineckates) and other complex cyanates, of inorganic bases (2842);”. Thiocarbonates, selenocarbonates, tellurocarbonates, selenocyanates, tellurocyanates, tetrathiocyanatodiamminochromates (reineckates) and other complex cyanates, of inorganic bases (2842);”. Thiocarbonates, selenocarbonates, tellurocarbonates, selenocyanates, tellurocyanates, tetrathiocyanatodiamminochromates (reineckates) and other complex cyanates, of inorganic bases (2842);”. Thiocarbonates, selenocarbonates, tellurocarbonates, selenocyanates, tellurocyanates, tetrathiocyanatodiamminochromates (reineckates) and other complex cyanates, of inorganic bases (2842);”. Thiocarbonates, selenocarbonates, tellurocarbonates, selenocyanates, tellurocyanates, tetrathiocyanatodiamminochromates (reineckates) and other complex cyanates, of inorganic bases (2842);”.
“(d) “(d) Thiocarbonates, selenocarbonates, tellurocarbonates, selenocyanates, tellurocyanates, tetrathiocyanatodiamminochromates (reineckates) and other complex cyanates, of inorganic bases (2842);”. Thiocarbonates, selenocarbonates, tellurocarbonates, selenocyanates, tellurocyanates, tetrathiocyanatodiamminochromates (reineckates) and other complex cyanates, of inorganic bases (2842);”. Thiocarbonates, selenocarbonates, tellurocarbonates, selenocyanates, tellurocyanates, tetrathiocyanatodiamminochromates (reineckates) and other complex cyanates, of inorganic bases (2842);”. Thiocarbonates, selenocarbonates, tellurocarbonates, selenocyanates, tellurocyanates, tetrathiocyanatodiamminochromates (reineckates) and other complex cyanates, of inorganic bases (2842);”. Thiocarbonates, selenocarbonates, tellurocarbonates, selenocyanates, tellurocyanates, tetrathiocyanatodiamminochromates (reineckates) and other complex cyanates, of inorganic bases (2842);”.
20. Omit 2809.20.90, substitute: Omit 2809.20.90, substitute: Omit 2809.20.90, substitute:
“2809.20.90 “2809.20.90 - - - Other 20% 20%
DC: 15% DC: 15%
From 1 January 1989 From 1 January 1989 17.5% 17.5%
From 1 January 1989 From 1 January 1989 DC: 12.5% DC: 12.5%
From 1 January 1990 From 1 January 1990 15% 15%
From 1 January 1990 From 1 January 1990 DC: 10% DC: 10%
From 1 January 1991 From 1 January 1991 12.5% 12.5%
From 1 January 1991 From 1 January 1991 DC: 7.5% DC: 7.5%
From 1 January 1992 From 1 January 1992 10% 10%
From 1 January 1992 From 1 January 1992 DC: 5%”. DC: 5%”.
21. Omit 2823.00.00, substitute: Omit 2823.00.00, substitute: Omit 2823.00.00, substitute:
“2823.00.00 “2823.00.00 TITANIUM OXIDES 15% 15%
DC: 10% DC: 10%
From 1 January 1989 From 1 January 1989 10% 10%
DC: 5% DC: 5%
From 1 January 1990 From 1 January 1990 7.5% 7.5%
DC: 15% DC: 15%
From 1 January 1991 From 1 January 1991 5% 5%
From 1 January 1992 From 1 January 1992 2%”. 2%”.
21 Omit 2835.26.00, substitute: Omit 2835.26.00, substitute: Omit 2835.26.00, substitute:
“2835.26.00 “2835.26.00 - - Other phosphates of calcium 20% 20%
“2835.26.00 “2835.26.00 - - Other phosphates of calcium DC: 15% DC: 15%
From 1 January 1989 From 1 January 1989 17.5% 17.5%
From 1 January 1989 From 1 January 1989 DC: 12.5% DC: 12.5%
From 1 January 1990 From 1 January 1990 15% 15%
DC: 10% DC: 10%
From 1 January 1991 From 1 January 1991 12.5% 12.5%
DC: 7.5% DC: 7.5%
From 1 January 1992 From 1 January 1992 10% 10%
From 1 January 1992 From 1 January 1992 DC: 5%”. DC: 5%”.
23. Omit 2903.40.10, substitute: Omit 2903.40.10, substitute: Omit 2903.40.10, substitute:
“2903.40.10 “2903.40.10 - - - Chlorofluorinated derivatives 20% 20%
DC: 15% DC: 15%
From 1 January 1989 From 1 January 1989 17.5% 17.5%
DC: 12.5% DC: 12.5%
From 1 January 1990 From 1 January 1990 15% 15%
DC: 10% DC: 10%
From 1 January 1991 From 1 January 1991 12.5% 12.5%
DC: 7.5% DC: 7.5%
From 1 January 1992 From 1 January 1992 10% 10%
DC: 5%”. DC: 5%”.

SCHEDULE—continued
24. Omit 2905.41.00, substitute: Omit 2905.41.00, substitute: Omit 2905.41.00, substitute: Omit 2905.41.00, substitute:
“2905.41.00 - - 2-Ethyl-2-(hydroxymethyl) propane-1, 3-diol (trimethylolpropane) - - 2-Ethyl-2-(hydroxymethyl) propane-1, 3-diol (trimethylolpropane) - - 2-Ethyl-2-(hydroxymethyl) propane-1, 3-diol (trimethylolpropane) - - 2-Ethyl-2-(hydroxymethyl) propane-1, 3-diol (trimethylolpropane) - - 2-Ethyl-2-(hydroxymethyl) propane-1, 3-diol (trimethylolpropane) 2% CAN: Free”. 2% CAN: Free”.
25. Omit 2909.60, substitute: Omit 2909.60, substitute: Omit 2909.60, substitute: Omit 2909.60, substitute:
“2909.60 - Alcohol peroxides, ether peroxides, ketone peroxides and their halogenated, sulphonated, nitrated or nitrosated derivatives: - Alcohol peroxides, ether peroxides, ketone peroxides and their halogenated, sulphonated, nitrated or nitrosated derivatives: - Alcohol peroxides, ether peroxides, ketone peroxides and their halogenated, sulphonated, nitrated or nitrosated derivatives: - Alcohol peroxides, ether peroxides, ketone peroxides and their halogenated, sulphonated, nitrated or nitrosated derivatives: - Alcohol peroxides, ether peroxides, ketone peroxides and their halogenated, sulphonated, nitrated or nitrosated derivatives:
2909.60.10 ---Goods, as follows: ---Goods, as follows: ---Goods, as follows: ---Goods, as follows: ---Goods, as follows: 20% 20%
(a) ethylene oxide derivatives; (b) di-t-butyl peroxide; (c) ethyl methyl ketone peroxide; (d) t-butyl hydroperoxide (a) ethylene oxide derivatives; (b) di-t-butyl peroxide; (c) ethyl methyl ketone peroxide; (d) t-butyl hydroperoxide (a) ethylene oxide derivatives; (b) di-t-butyl peroxide; (c) ethyl methyl ketone peroxide; (d) t-butyl hydroperoxide (a) ethylene oxide derivatives; (b) di-t-butyl peroxide; (c) ethyl methyl ketone peroxide; (d) t-butyl hydroperoxide (a) ethylene oxide derivatives; (b) di-t-butyl peroxide; (c) ethyl methyl ketone peroxide; (d) t-butyl hydroperoxide DC: 15% DC: 15%
From 1 January 1989 From 1 January 1989 From 1 January 1989 From 1 January 1989 From 1 January 1989 17.5% DC: 12.5% 17.5% DC: 12.5%
From 1 January 1990 From 1 January 1990 From 1 January 1990 From 1 January 1990 From 1 January 1990 15% 15%
DC: 10% DC: 10%
From 1 January 1991 From 1 January 1991 From 1 January 1991 From 1 January 1991 From 1 January 1991 12.5% 12.5%
DC: 7.5% DC: 7.5%
From 1 January 1992 From 1 January 1992 From 1 January 1992 From 1 January 1992 From 1 January 1992 10% 10%
DC: 5% DC: 5%
2909.60.90 - - - Other - - - Other - - - Other - - - Other - - - Other 2%”. 2%”.
26. Omit 2915.39.10, substitute: Omit 2915.39.10, substitute: Omit 2915.39.10, substitute: Omit 2915.39.10, substitute: Omit 2915.39.10, substitute:
“2915.39.10 “2915.39.10 - - - Glycerol triacetate - - - Glycerol triacetate - - - Glycerol triacetate From 1 January 1992 5% 2%”. 5% 2%”.
27. Omit 2916.12.00, substitute: Omit 2916.12.00, substitute: Omit 2916.12.00, substitute: Omit 2916.12.00, substitute: Omit 2916.12.00, substitute:
“2916.12.00 “2916.12.00 - - Esters of acrylic acid - - Esters of acrylic acid - - Esters of acrylic acid 2%”. 2%”.
28. Omit 2916.32.00,’ substitute: Omit 2916.32.00,’ substitute: Omit 2916.32.00,’ substitute: Omit 2916.32.00,’ substitute: Omit 2916.32.00,’ substitute:
“2916.32.00 - - Benzoyl peroxide and benzoyl chloride - - Benzoyl peroxide and benzoyl chloride - - Benzoyl peroxide and benzoyl chloride - - Benzoyl peroxide and benzoyl chloride 20% 20%
DC: 15% DC: 15%
From 1 January 1989 17.5% 17.5%
DC: 12.5% DC: 12.5%
From 1 January 1990 15% 15%
DC: 10% DC: 10%
From 1 January 1991 12.5% 12.5%
DC: 7.5% DC: 7.5%
From 1 January 1992 10% 10%
29. Omit 2916.39.00, substitute: Omit 2916.39.00, substitute: Omit 2916.39.00, substitute: Omit 2916.39.00, substitute: Omit 2916.39.00, substitute: DC: 5%”. DC: 5%”.
“2916.39.00 - - Other - - Other - - Other - - Other 20% 20%
DC: 15% DC: 15%
From 1 January 1989 17.5% 17.5%
DC: 12.5% DC: 12.5%
From 1 January 1990 15% 15%
DC: 10% DC: 10%
From 1 January 1991 12.5% 12.5%
DC: 7.5% DC: 7.5%
From 1 January 1992 10% 10%
30. Omit 2921.43.00, substitute: Omit 2921.43.00, substitute: Omit 2921.43.00, substitute: Omit 2921.43.00, substitute: Omit 2921.43.00, substitute: DC: 5%”. DC: 5%”.
“2921.43 - - Toluidines and their derivatives; salts thereof: - - Toluidines and their derivatives; salts thereof: - - Toluidines and their derivatives; salts thereof: - - Toluidines and their derivatives; salts thereof: - - Toluidines and their derivatives; salts thereof:
2921.43.10 - - - Toluidine derivatives containing fluoro, nitro and propyl groups - - - Toluidine derivatives containing fluoro, nitro and propyl groups - - - Toluidine derivatives containing fluoro, nitro and propyl groups - - - Toluidine derivatives containing fluoro, nitro and propyl groups - - - Toluidine derivatives containing fluoro, nitro and propyl groups 10% 10%
DC: 5% DC: 5%
2921.43.90 ---Other ---Other ---Other ---Other ---Other 2%”. 2%”.
31. Omit 2938.90, substitute: Omit 2938.90, substitute: Omit 2938.90, substitute: Omit 2938.90, substitute: Omit 2938.90, substitute:
“2938.90.00 “2938.90.00 “2938.90.00 - Other - Other 2%”. 2%”.
32. Omit 2940.00.00, substitute: Omit 2940.00.00, substitute: Omit 2940.00.00, substitute: Omit 2940.00.00, substitute: Omit 2940.00.00, substitute:
“2940 SUGARS, CHEMICALLY PURE, OTHER THAN SUCROSE, LACTOSE, MALTOSE. GLUCOSE AND FRUCTOSE; SUGAR ETHERS AND SUGAR ESTERS. AND THEIR SALTS, OTHER THAN PRODUCTS OF 2937, 2938 or 2939: SUGARS, CHEMICALLY PURE, OTHER THAN SUCROSE, LACTOSE, MALTOSE. GLUCOSE AND FRUCTOSE; SUGAR ETHERS AND SUGAR ESTERS. AND THEIR SALTS, OTHER THAN PRODUCTS OF 2937, 2938 or 2939: SUGARS, CHEMICALLY PURE, OTHER THAN SUCROSE, LACTOSE, MALTOSE. GLUCOSE AND FRUCTOSE; SUGAR ETHERS AND SUGAR ESTERS. AND THEIR SALTS, OTHER THAN PRODUCTS OF 2937, 2938 or 2939: SUGARS, CHEMICALLY PURE, OTHER THAN SUCROSE, LACTOSE, MALTOSE. GLUCOSE AND FRUCTOSE; SUGAR ETHERS AND SUGAR ESTERS. AND THEIR SALTS, OTHER THAN PRODUCTS OF 2937, 2938 or 2939: SUGARS, CHEMICALLY PURE, OTHER THAN SUCROSE, LACTOSE, MALTOSE. GLUCOSE AND FRUCTOSE; SUGAR ETHERS AND SUGAR ESTERS. AND THEIR SALTS, OTHER THAN PRODUCTS OF 2937, 2938 or 2939: SUGARS, CHEMICALLY PURE, OTHER THAN SUCROSE, LACTOSE, MALTOSE. GLUCOSE AND FRUCTOSE; SUGAR ETHERS AND SUGAR ESTERS. AND THEIR SALTS, OTHER THAN PRODUCTS OF 2937, 2938 or 2939:
2940.00.10 - - - Polyols being polyhydroxyether compounds containing 2 or more hydroxyl groups per molecule and containing not less than 50% by weight of reacted propylene oxide, not being polyesters - - - Polyols being polyhydroxyether compounds containing 2 or more hydroxyl groups per molecule and containing not less than 50% by weight of reacted propylene oxide, not being polyesters - - - Polyols being polyhydroxyether compounds containing 2 or more hydroxyl groups per molecule and containing not less than 50% by weight of reacted propylene oxide, not being polyesters - - - Polyols being polyhydroxyether compounds containing 2 or more hydroxyl groups per molecule and containing not less than 50% by weight of reacted propylene oxide, not being polyesters - - - Polyols being polyhydroxyether compounds containing 2 or more hydroxyl groups per molecule and containing not less than 50% by weight of reacted propylene oxide, not being polyesters 20% DC: 15% 20% DC: 15%
From 1 January 1989 From 1 January 1989 From 1 January 1989 From 1 January 1989 From 1 January 1989 17.5% 17.5%
DC: 12.5% DC: 12.5%

SCHEDULE—continued
From 1 January 1990 15%
DC: 10%
From 1 January 1991 12.5%
DC: 7.5%
From 1 January 1992 10%
DC: 5%
2940.00.90 ---Other 2%”.
33. Omit 3005.90.00, substitute: Omit 3005.90.00, substitute:
“3005.90 - Other
3005.90.10 - - - Wadding, including cotton wool and absorbent cotton 10%
3005.90.10 - - - Wadding, including cotton wool and absorbent cotton DC: 5%
3005.90.90 - - - Other 5%
CAN: Free”.
34. Omit 3206.20.10, substitute: Omit 3206.20.10, substitute:
“3206.20.10 ---Goods, as follows: 20%
(a) containing added synthetic organic colouring matter, (b) intermixtures and preparations, containing: (i) chrome greens: (ii) lead chromes; (iii) molybdate chromes; (iv) pigments of cadmium compounds; (v) strontium chromes; (vi) zinc chromes; or (vii) zinc greens DC: 15%
(a) containing added synthetic organic colouring matter, (b) intermixtures and preparations, containing: (i) chrome greens: (ii) lead chromes; (iii) molybdate chromes; (iv) pigments of cadmium compounds; (v) strontium chromes; (vi) zinc chromes; or (vii) zinc greens
(a) containing added synthetic organic colouring matter, (b) intermixtures and preparations, containing: (i) chrome greens: (ii) lead chromes; (iii) molybdate chromes; (iv) pigments of cadmium compounds; (v) strontium chromes; (vi) zinc chromes; or (vii) zinc greens
(a) containing added synthetic organic colouring matter, (b) intermixtures and preparations, containing: (i) chrome greens: (ii) lead chromes; (iii) molybdate chromes; (iv) pigments of cadmium compounds; (v) strontium chromes; (vi) zinc chromes; or (vii) zinc greens
(a) containing added synthetic organic colouring matter, (b) intermixtures and preparations, containing: (i) chrome greens: (ii) lead chromes; (iii) molybdate chromes; (iv) pigments of cadmium compounds; (v) strontium chromes; (vi) zinc chromes; or (vii) zinc greens
(a) containing added synthetic organic colouring matter, (b) intermixtures and preparations, containing: (i) chrome greens: (ii) lead chromes; (iii) molybdate chromes; (iv) pigments of cadmium compounds; (v) strontium chromes; (vi) zinc chromes; or (vii) zinc greens
(a) containing added synthetic organic colouring matter, (b) intermixtures and preparations, containing: (i) chrome greens: (ii) lead chromes; (iii) molybdate chromes; (iv) pigments of cadmium compounds; (v) strontium chromes; (vi) zinc chromes; or (vii) zinc greens
(a) containing added synthetic organic colouring matter, (b) intermixtures and preparations, containing: (i) chrome greens: (ii) lead chromes; (iii) molybdate chromes; (iv) pigments of cadmium compounds; (v) strontium chromes; (vi) zinc chromes; or (vii) zinc greens
(a) containing added synthetic organic colouring matter, (b) intermixtures and preparations, containing: (i) chrome greens: (ii) lead chromes; (iii) molybdate chromes; (iv) pigments of cadmium compounds; (v) strontium chromes; (vi) zinc chromes; or (vii) zinc greens
From 1 January 1989 17.5%
DC: 12.5%
From 1 January 1990 15%
DC: 10%”.
35. Omit 3206.41.10, substitute: Omit 3206.41.10, substitute:
“3206.41.10 ---Goods, as follows: 20%
(a) containing added synthetic organic colouring matter; (b) zinc greens; (c) intermixtures and preparations, containing: (i) chrome greens; (ii) lead chromes; (iii) molybdate chromes; (iv) pigments of cadmium compounds; (v) strontium chromes; (vi) zinc chromes; or (vii) zinc greens DC: 15%
(a) containing added synthetic organic colouring matter; (b) zinc greens; (c) intermixtures and preparations, containing: (i) chrome greens; (ii) lead chromes; (iii) molybdate chromes; (iv) pigments of cadmium compounds; (v) strontium chromes; (vi) zinc chromes; or (vii) zinc greens
(a) containing added synthetic organic colouring matter; (b) zinc greens; (c) intermixtures and preparations, containing: (i) chrome greens; (ii) lead chromes; (iii) molybdate chromes; (iv) pigments of cadmium compounds; (v) strontium chromes; (vi) zinc chromes; or (vii) zinc greens
(a) containing added synthetic organic colouring matter; (b) zinc greens; (c) intermixtures and preparations, containing: (i) chrome greens; (ii) lead chromes; (iii) molybdate chromes; (iv) pigments of cadmium compounds; (v) strontium chromes; (vi) zinc chromes; or (vii) zinc greens
(a) containing added synthetic organic colouring matter; (b) zinc greens; (c) intermixtures and preparations, containing: (i) chrome greens; (ii) lead chromes; (iii) molybdate chromes; (iv) pigments of cadmium compounds; (v) strontium chromes; (vi) zinc chromes; or (vii) zinc greens
(a) containing added synthetic organic colouring matter; (b) zinc greens; (c) intermixtures and preparations, containing: (i) chrome greens; (ii) lead chromes; (iii) molybdate chromes; (iv) pigments of cadmium compounds; (v) strontium chromes; (vi) zinc chromes; or (vii) zinc greens
(a) containing added synthetic organic colouring matter; (b) zinc greens; (c) intermixtures and preparations, containing: (i) chrome greens; (ii) lead chromes; (iii) molybdate chromes; (iv) pigments of cadmium compounds; (v) strontium chromes; (vi) zinc chromes; or (vii) zinc greens
(a) containing added synthetic organic colouring matter; (b) zinc greens; (c) intermixtures and preparations, containing: (i) chrome greens; (ii) lead chromes; (iii) molybdate chromes; (iv) pigments of cadmium compounds; (v) strontium chromes; (vi) zinc chromes; or (vii) zinc greens
(a) containing added synthetic organic colouring matter; (b) zinc greens; (c) intermixtures and preparations, containing: (i) chrome greens; (ii) lead chromes; (iii) molybdate chromes; (iv) pigments of cadmium compounds; (v) strontium chromes; (vi) zinc chromes; or (vii) zinc greens
(a) containing added synthetic organic colouring matter; (b) zinc greens; (c) intermixtures and preparations, containing: (i) chrome greens; (ii) lead chromes; (iii) molybdate chromes; (iv) pigments of cadmium compounds; (v) strontium chromes; (vi) zinc chromes; or (vii) zinc greens
From 1 January 1989 17.5%
DC: 12.5%
From 1 January 1990 15%
DC: 10%”.
36. Omit 3402.20.00 and 3402.90.00, substitute: Omit 3402.20.00 and 3402.90.00, substitute:
“3402.20.00 - Preparations put up for retail sale 15%
DC: 10%
3402.90.00 - Other 15%
DC: 10%”.
37. Omit 3506.91.00, substitute: Omit 3506.91.00, substitute:
“3506.91.00 - - Adhesives based on rubber or plastics (including artificial resins) 20%
“3506.91.00 - - Adhesives based on rubber or plastics (including artificial resins) DC: 15%
From 1 January 1989 17.5%
DC: 12.5%
From 1 January 1990 15%
DC: 10%”.
38. Omit 3602.00.00, substitute: Omit 3602.00.00, substitute:
“3602.00.00 PREPARED EXPLOSIVES, OTHER THAN PROPELLENT POWDERS 10%
PREPARED EXPLOSIVES, OTHER THAN PROPELLENT POWDERS DC: 5%”.
39. Omit 3707, substitute: Omit 3707, substitute:
“3707 CHEMICAL PREPARATIONS FOR PHOTOGRAPHIC USES (OTHER THAN VARNISHES, GLUES, ADHESIVES AND SIMILAR PREPARATIONS); UNMIXED PRODUCTS FOR PHOTOGRAPHIC USES, PUT UP IN MEASURED PORTIONS OR PUT UP FOR RETAIL SALE IN A FORM READY FOR USE:
CHEMICAL PREPARATIONS FOR PHOTOGRAPHIC USES (OTHER THAN VARNISHES, GLUES, ADHESIVES AND SIMILAR PREPARATIONS); UNMIXED PRODUCTS FOR PHOTOGRAPHIC USES, PUT UP IN MEASURED PORTIONS OR PUT UP FOR RETAIL SALE IN A FORM READY FOR USE:
CHEMICAL PREPARATIONS FOR PHOTOGRAPHIC USES (OTHER THAN VARNISHES, GLUES, ADHESIVES AND SIMILAR PREPARATIONS); UNMIXED PRODUCTS FOR PHOTOGRAPHIC USES, PUT UP IN MEASURED PORTIONS OR PUT UP FOR RETAIL SALE IN A FORM READY FOR USE:
CHEMICAL PREPARATIONS FOR PHOTOGRAPHIC USES (OTHER THAN VARNISHES, GLUES, ADHESIVES AND SIMILAR PREPARATIONS); UNMIXED PRODUCTS FOR PHOTOGRAPHIC USES, PUT UP IN MEASURED PORTIONS OR PUT UP FOR RETAIL SALE IN A FORM READY FOR USE:
3707.10.00 - Sensitised emulsions 10%
DC: 5%

SCHEDULE—continued
3707.90.00 3707.90.00 - Other 10% 10% 10%
DC: 5%”. DC: 5%”. DC: 5%”.
40. Omit 3817.10.00, substitute: 40. Omit 3817.10.00, substitute: 40. Omit 3817.10.00, substitute: 40. Omit 3817.10.00, substitute:
“3817.10.00 “3817.10.00 - Mixed alkylbenzenes 20% 20% 20%
DC: 15% DC: 15% DC: 15%
From 1 January 1989 17.5% 17.5% 17.5%
DC: 12.5% DC: 12.5% DC: 12.5%
From 1 January 1990 15% 15% 15%
DC: 10% DC: 10% DC: 10%
From 1 January 1991 12.5% 12.5% 12.5%
DC: 7.5% DC: 7.5% DC: 7.5%
From 1 January 1992 10% 10% 10%
DC: 5%”. DC: 5%”. DC: 5%”.
41. Omit 3819.00.00, substitute: Omit 3819.00.00, substitute: Omit 3819.00.00, substitute:
“3819.00.00 “3819.00.00 HYDRAULIC BRAKE FLUIDS AND OTHER PREPARED LIQUIDS FOR HYDRAULIC TRANSMISSION, NOT CONTAINING OR CONTAINING LESS THAN 70% BY WEIGHT OF PETROLEUM OILS OR OILS OBTAINED FROM BITUMINOUS MINERALS HYDRAULIC BRAKE FLUIDS AND OTHER PREPARED LIQUIDS FOR HYDRAULIC TRANSMISSION, NOT CONTAINING OR CONTAINING LESS THAN 70% BY WEIGHT OF PETROLEUM OILS OR OILS OBTAINED FROM BITUMINOUS MINERALS 15% 15%
HYDRAULIC BRAKE FLUIDS AND OTHER PREPARED LIQUIDS FOR HYDRAULIC TRANSMISSION, NOT CONTAINING OR CONTAINING LESS THAN 70% BY WEIGHT OF PETROLEUM OILS OR OILS OBTAINED FROM BITUMINOUS MINERALS HYDRAULIC BRAKE FLUIDS AND OTHER PREPARED LIQUIDS FOR HYDRAULIC TRANSMISSION, NOT CONTAINING OR CONTAINING LESS THAN 70% BY WEIGHT OF PETROLEUM OILS OR OILS OBTAINED FROM BITUMINOUS MINERALS DC: 10%” DC: 10%”
42. Omit 3823.90.90, substitute: Omit 3823.90.90, substitute: Omit 3823.90.90, substitute:
“3823.90.90 “3823.90.90 ---Other 10% 10% 10%
DC: 5%”. DC: 5%”. DC: 5%”.
43. Omit the Additional Note to Section VII. Omit the Additional Note to Section VII. Omit the Additional Note to Section VII.
44. Omit 3912.20.00, substitute: Omit 3912.20.00, substitute: Omit 3912.20.00, substitute:
“3912.20.00 “3912.20.00 - Cellulose nitrates (including collodions) 20% 20% 20%
DC: 15% DC: 15% DC: 15%
From 1 January 1989 17.5% 17.5% 17.5%
DC: 12.5% DC: 12.5% DC: 12.5%
From 1 January 1990 15% 15% 15%
DC: 10% DC: 10% DC: 10%
From 1 January 1991 12.5% 12.5% 12.5%
DC: 7.5% DC: 7.5% DC: 7.5%
From 1 January 1992 10% 10% 10%
DC: 5%”. DC: 5%”. DC: 5%”.
45. Omit 4008.11.00, substitute: Omit 4008.11.00, substitute: Omit 4008.11.00, substitute:
“4008.11 “4008.11 - - Plates, sheets and strip:
4008.11.10 4008.11.10 ---Of expanded foam rubber combined with textile fabric 15% 15% 15%
DC: 10% DC: 10% DC: 10%
4008.11.90 4008.11.90 ---Other 25% 25% 25%
DC: 20%”. DC: 20%”. DC: 20%”.
46. Omit 4106.1, substitute: Omit 4106.1, substitute: Omit 4106.1, substitute:
“4106.1 “4106.1 - Tanned or retanned but not further prepared, whether or not split:
4106.11.00 4106.11.00 - - Vegetable pre-tanned 2% 2% 2%
4106.12.00 4106.12.00 - - Otherwise pre-tanned 2% 2% 2%
4106.19.00 4106.19.00 - - Other 15% 15% 15%
DC: 10%”. DC: 10%”. DC: 10%”.
47. Omit 4202, substitute: Omit 4202, substitute: Omit 4202, substitute:
“4202 TRUNKS, SUIT-CASES, VANITY-CASES, EXECUTIVE-CASES, BRIEF-CASES, SCHOOL SATCHELS, SPECTACLE CASES, BINOCULAR CASES, CAMERA CASES, MUSICAL INSTRUMENT CASES, GUN CASES, HOLSTERS AND SIMILAR CONTAINERS; TRAVELLING-BAGS, TOILET BAGS, RUCKSACKS, HANDBAGS, SHOPPING-BAGS, WALLETS, PURSES, MAP-CASES, CIGARETTE-CASES, TOBACCO-POUCHES, TOOL BAGS, SPORTS BAGS, BOTTLE-CASES, JEWELLERY BOXES. POWDER-BOXES. CUTLERY-CASES AND SIMILAR CONTAINERS. OF LEATHER OR OF COMPOSITION LEATHER, OF PLASTIC SHEETING, OF TEXTILE MATERIALS, OF VULCANISED FIBRE OR OF PAPERBOARD, OR WHOLLY OR MAINLY COVERED WITH SUCH MATERIALS: TRUNKS, SUIT-CASES, VANITY-CASES, EXECUTIVE-CASES, BRIEF-CASES, SCHOOL SATCHELS, SPECTACLE CASES, BINOCULAR CASES, CAMERA CASES, MUSICAL INSTRUMENT CASES, GUN CASES, HOLSTERS AND SIMILAR CONTAINERS; TRAVELLING-BAGS, TOILET BAGS, RUCKSACKS, HANDBAGS, SHOPPING-BAGS, WALLETS, PURSES, MAP-CASES, CIGARETTE-CASES, TOBACCO-POUCHES, TOOL BAGS, SPORTS BAGS, BOTTLE-CASES, JEWELLERY BOXES. POWDER-BOXES. CUTLERY-CASES AND SIMILAR CONTAINERS. OF LEATHER OR OF COMPOSITION LEATHER, OF PLASTIC SHEETING, OF TEXTILE MATERIALS, OF VULCANISED FIBRE OR OF PAPERBOARD, OR WHOLLY OR MAINLY COVERED WITH SUCH MATERIALS: TRUNKS, SUIT-CASES, VANITY-CASES, EXECUTIVE-CASES, BRIEF-CASES, SCHOOL SATCHELS, SPECTACLE CASES, BINOCULAR CASES, CAMERA CASES, MUSICAL INSTRUMENT CASES, GUN CASES, HOLSTERS AND SIMILAR CONTAINERS; TRAVELLING-BAGS, TOILET BAGS, RUCKSACKS, HANDBAGS, SHOPPING-BAGS, WALLETS, PURSES, MAP-CASES, CIGARETTE-CASES, TOBACCO-POUCHES, TOOL BAGS, SPORTS BAGS, BOTTLE-CASES, JEWELLERY BOXES. POWDER-BOXES. CUTLERY-CASES AND SIMILAR CONTAINERS. OF LEATHER OR OF COMPOSITION LEATHER, OF PLASTIC SHEETING, OF TEXTILE MATERIALS, OF VULCANISED FIBRE OR OF PAPERBOARD, OR WHOLLY OR MAINLY COVERED WITH SUCH MATERIALS: TRUNKS, SUIT-CASES, VANITY-CASES, EXECUTIVE-CASES, BRIEF-CASES, SCHOOL SATCHELS, SPECTACLE CASES, BINOCULAR CASES, CAMERA CASES, MUSICAL INSTRUMENT CASES, GUN CASES, HOLSTERS AND SIMILAR CONTAINERS; TRAVELLING-BAGS, TOILET BAGS, RUCKSACKS, HANDBAGS, SHOPPING-BAGS, WALLETS, PURSES, MAP-CASES, CIGARETTE-CASES, TOBACCO-POUCHES, TOOL BAGS, SPORTS BAGS, BOTTLE-CASES, JEWELLERY BOXES. POWDER-BOXES. CUTLERY-CASES AND SIMILAR CONTAINERS. OF LEATHER OR OF COMPOSITION LEATHER, OF PLASTIC SHEETING, OF TEXTILE MATERIALS, OF VULCANISED FIBRE OR OF PAPERBOARD, OR WHOLLY OR MAINLY COVERED WITH SUCH MATERIALS:
TRUNKS, SUIT-CASES, VANITY-CASES, EXECUTIVE-CASES, BRIEF-CASES, SCHOOL SATCHELS, SPECTACLE CASES, BINOCULAR CASES, CAMERA CASES, MUSICAL INSTRUMENT CASES, GUN CASES, HOLSTERS AND SIMILAR CONTAINERS; TRAVELLING-BAGS, TOILET BAGS, RUCKSACKS, HANDBAGS, SHOPPING-BAGS, WALLETS, PURSES, MAP-CASES, CIGARETTE-CASES, TOBACCO-POUCHES, TOOL BAGS, SPORTS BAGS, BOTTLE-CASES, JEWELLERY BOXES. POWDER-BOXES. CUTLERY-CASES AND SIMILAR CONTAINERS. OF LEATHER OR OF COMPOSITION LEATHER, OF PLASTIC SHEETING, OF TEXTILE MATERIALS, OF VULCANISED FIBRE OR OF PAPERBOARD, OR WHOLLY OR MAINLY COVERED WITH SUCH MATERIALS: TRUNKS, SUIT-CASES, VANITY-CASES, EXECUTIVE-CASES, BRIEF-CASES, SCHOOL SATCHELS, SPECTACLE CASES, BINOCULAR CASES, CAMERA CASES, MUSICAL INSTRUMENT CASES, GUN CASES, HOLSTERS AND SIMILAR CONTAINERS; TRAVELLING-BAGS, TOILET BAGS, RUCKSACKS, HANDBAGS, SHOPPING-BAGS, WALLETS, PURSES, MAP-CASES, CIGARETTE-CASES, TOBACCO-POUCHES, TOOL BAGS, SPORTS BAGS, BOTTLE-CASES, JEWELLERY BOXES. POWDER-BOXES. CUTLERY-CASES AND SIMILAR CONTAINERS. OF LEATHER OR OF COMPOSITION LEATHER, OF PLASTIC SHEETING, OF TEXTILE MATERIALS, OF VULCANISED FIBRE OR OF PAPERBOARD, OR WHOLLY OR MAINLY COVERED WITH SUCH MATERIALS: TRUNKS, SUIT-CASES, VANITY-CASES, EXECUTIVE-CASES, BRIEF-CASES, SCHOOL SATCHELS, SPECTACLE CASES, BINOCULAR CASES, CAMERA CASES, MUSICAL INSTRUMENT CASES, GUN CASES, HOLSTERS AND SIMILAR CONTAINERS; TRAVELLING-BAGS, TOILET BAGS, RUCKSACKS, HANDBAGS, SHOPPING-BAGS, WALLETS, PURSES, MAP-CASES, CIGARETTE-CASES, TOBACCO-POUCHES, TOOL BAGS, SPORTS BAGS, BOTTLE-CASES, JEWELLERY BOXES. POWDER-BOXES. CUTLERY-CASES AND SIMILAR CONTAINERS. OF LEATHER OR OF COMPOSITION LEATHER, OF PLASTIC SHEETING, OF TEXTILE MATERIALS, OF VULCANISED FIBRE OR OF PAPERBOARD, OR WHOLLY OR MAINLY COVERED WITH SUCH MATERIALS: TRUNKS, SUIT-CASES, VANITY-CASES, EXECUTIVE-CASES, BRIEF-CASES, SCHOOL SATCHELS, SPECTACLE CASES, BINOCULAR CASES, CAMERA CASES, MUSICAL INSTRUMENT CASES, GUN CASES, HOLSTERS AND SIMILAR CONTAINERS; TRAVELLING-BAGS, TOILET BAGS, RUCKSACKS, HANDBAGS, SHOPPING-BAGS, WALLETS, PURSES, MAP-CASES, CIGARETTE-CASES, TOBACCO-POUCHES, TOOL BAGS, SPORTS BAGS, BOTTLE-CASES, JEWELLERY BOXES. POWDER-BOXES. CUTLERY-CASES AND SIMILAR CONTAINERS. OF LEATHER OR OF COMPOSITION LEATHER, OF PLASTIC SHEETING, OF TEXTILE MATERIALS, OF VULCANISED FIBRE OR OF PAPERBOARD, OR WHOLLY OR MAINLY COVERED WITH SUCH MATERIALS:
TRUNKS, SUIT-CASES, VANITY-CASES, EXECUTIVE-CASES, BRIEF-CASES, SCHOOL SATCHELS, SPECTACLE CASES, BINOCULAR CASES, CAMERA CASES, MUSICAL INSTRUMENT CASES, GUN CASES, HOLSTERS AND SIMILAR CONTAINERS; TRAVELLING-BAGS, TOILET BAGS, RUCKSACKS, HANDBAGS, SHOPPING-BAGS, WALLETS, PURSES, MAP-CASES, CIGARETTE-CASES, TOBACCO-POUCHES, TOOL BAGS, SPORTS BAGS, BOTTLE-CASES, JEWELLERY BOXES. POWDER-BOXES. CUTLERY-CASES AND SIMILAR CONTAINERS. OF LEATHER OR OF COMPOSITION LEATHER, OF PLASTIC SHEETING, OF TEXTILE MATERIALS, OF VULCANISED FIBRE OR OF PAPERBOARD, OR WHOLLY OR MAINLY COVERED WITH SUCH MATERIALS: TRUNKS, SUIT-CASES, VANITY-CASES, EXECUTIVE-CASES, BRIEF-CASES, SCHOOL SATCHELS, SPECTACLE CASES, BINOCULAR CASES, CAMERA CASES, MUSICAL INSTRUMENT CASES, GUN CASES, HOLSTERS AND SIMILAR CONTAINERS; TRAVELLING-BAGS, TOILET BAGS, RUCKSACKS, HANDBAGS, SHOPPING-BAGS, WALLETS, PURSES, MAP-CASES, CIGARETTE-CASES, TOBACCO-POUCHES, TOOL BAGS, SPORTS BAGS, BOTTLE-CASES, JEWELLERY BOXES. POWDER-BOXES. CUTLERY-CASES AND SIMILAR CONTAINERS. OF LEATHER OR OF COMPOSITION LEATHER, OF PLASTIC SHEETING, OF TEXTILE MATERIALS, OF VULCANISED FIBRE OR OF PAPERBOARD, OR WHOLLY OR MAINLY COVERED WITH SUCH MATERIALS: TRUNKS, SUIT-CASES, VANITY-CASES, EXECUTIVE-CASES, BRIEF-CASES, SCHOOL SATCHELS, SPECTACLE CASES, BINOCULAR CASES, CAMERA CASES, MUSICAL INSTRUMENT CASES, GUN CASES, HOLSTERS AND SIMILAR CONTAINERS; TRAVELLING-BAGS, TOILET BAGS, RUCKSACKS, HANDBAGS, SHOPPING-BAGS, WALLETS, PURSES, MAP-CASES, CIGARETTE-CASES, TOBACCO-POUCHES, TOOL BAGS, SPORTS BAGS, BOTTLE-CASES, JEWELLERY BOXES. POWDER-BOXES. CUTLERY-CASES AND SIMILAR CONTAINERS. OF LEATHER OR OF COMPOSITION LEATHER, OF PLASTIC SHEETING, OF TEXTILE MATERIALS, OF VULCANISED FIBRE OR OF PAPERBOARD, OR WHOLLY OR MAINLY COVERED WITH SUCH MATERIALS: TRUNKS, SUIT-CASES, VANITY-CASES, EXECUTIVE-CASES, BRIEF-CASES, SCHOOL SATCHELS, SPECTACLE CASES, BINOCULAR CASES, CAMERA CASES, MUSICAL INSTRUMENT CASES, GUN CASES, HOLSTERS AND SIMILAR CONTAINERS; TRAVELLING-BAGS, TOILET BAGS, RUCKSACKS, HANDBAGS, SHOPPING-BAGS, WALLETS, PURSES, MAP-CASES, CIGARETTE-CASES, TOBACCO-POUCHES, TOOL BAGS, SPORTS BAGS, BOTTLE-CASES, JEWELLERY BOXES. POWDER-BOXES. CUTLERY-CASES AND SIMILAR CONTAINERS. OF LEATHER OR OF COMPOSITION LEATHER, OF PLASTIC SHEETING, OF TEXTILE MATERIALS, OF VULCANISED FIBRE OR OF PAPERBOARD, OR WHOLLY OR MAINLY COVERED WITH SUCH MATERIALS:
TRUNKS, SUIT-CASES, VANITY-CASES, EXECUTIVE-CASES, BRIEF-CASES, SCHOOL SATCHELS, SPECTACLE CASES, BINOCULAR CASES, CAMERA CASES, MUSICAL INSTRUMENT CASES, GUN CASES, HOLSTERS AND SIMILAR CONTAINERS; TRAVELLING-BAGS, TOILET BAGS, RUCKSACKS, HANDBAGS, SHOPPING-BAGS, WALLETS, PURSES, MAP-CASES, CIGARETTE-CASES, TOBACCO-POUCHES, TOOL BAGS, SPORTS BAGS, BOTTLE-CASES, JEWELLERY BOXES. POWDER-BOXES. CUTLERY-CASES AND SIMILAR CONTAINERS. OF LEATHER OR OF COMPOSITION LEATHER, OF PLASTIC SHEETING, OF TEXTILE MATERIALS, OF VULCANISED FIBRE OR OF PAPERBOARD, OR WHOLLY OR MAINLY COVERED WITH SUCH MATERIALS: TRUNKS, SUIT-CASES, VANITY-CASES, EXECUTIVE-CASES, BRIEF-CASES, SCHOOL SATCHELS, SPECTACLE CASES, BINOCULAR CASES, CAMERA CASES, MUSICAL INSTRUMENT CASES, GUN CASES, HOLSTERS AND SIMILAR CONTAINERS; TRAVELLING-BAGS, TOILET BAGS, RUCKSACKS, HANDBAGS, SHOPPING-BAGS, WALLETS, PURSES, MAP-CASES, CIGARETTE-CASES, TOBACCO-POUCHES, TOOL BAGS, SPORTS BAGS, BOTTLE-CASES, JEWELLERY BOXES. POWDER-BOXES. CUTLERY-CASES AND SIMILAR CONTAINERS. OF LEATHER OR OF COMPOSITION LEATHER, OF PLASTIC SHEETING, OF TEXTILE MATERIALS, OF VULCANISED FIBRE OR OF PAPERBOARD, OR WHOLLY OR MAINLY COVERED WITH SUCH MATERIALS: TRUNKS, SUIT-CASES, VANITY-CASES, EXECUTIVE-CASES, BRIEF-CASES, SCHOOL SATCHELS, SPECTACLE CASES, BINOCULAR CASES, CAMERA CASES, MUSICAL INSTRUMENT CASES, GUN CASES, HOLSTERS AND SIMILAR CONTAINERS; TRAVELLING-BAGS, TOILET BAGS, RUCKSACKS, HANDBAGS, SHOPPING-BAGS, WALLETS, PURSES, MAP-CASES, CIGARETTE-CASES, TOBACCO-POUCHES, TOOL BAGS, SPORTS BAGS, BOTTLE-CASES, JEWELLERY BOXES. POWDER-BOXES. CUTLERY-CASES AND SIMILAR CONTAINERS. OF LEATHER OR OF COMPOSITION LEATHER, OF PLASTIC SHEETING, OF TEXTILE MATERIALS, OF VULCANISED FIBRE OR OF PAPERBOARD, OR WHOLLY OR MAINLY COVERED WITH SUCH MATERIALS: TRUNKS, SUIT-CASES, VANITY-CASES, EXECUTIVE-CASES, BRIEF-CASES, SCHOOL SATCHELS, SPECTACLE CASES, BINOCULAR CASES, CAMERA CASES, MUSICAL INSTRUMENT CASES, GUN CASES, HOLSTERS AND SIMILAR CONTAINERS; TRAVELLING-BAGS, TOILET BAGS, RUCKSACKS, HANDBAGS, SHOPPING-BAGS, WALLETS, PURSES, MAP-CASES, CIGARETTE-CASES, TOBACCO-POUCHES, TOOL BAGS, SPORTS BAGS, BOTTLE-CASES, JEWELLERY BOXES. POWDER-BOXES. CUTLERY-CASES AND SIMILAR CONTAINERS. OF LEATHER OR OF COMPOSITION LEATHER, OF PLASTIC SHEETING, OF TEXTILE MATERIALS, OF VULCANISED FIBRE OR OF PAPERBOARD, OR WHOLLY OR MAINLY COVERED WITH SUCH MATERIALS:
TRUNKS, SUIT-CASES, VANITY-CASES, EXECUTIVE-CASES, BRIEF-CASES, SCHOOL SATCHELS, SPECTACLE CASES, BINOCULAR CASES, CAMERA CASES, MUSICAL INSTRUMENT CASES, GUN CASES, HOLSTERS AND SIMILAR CONTAINERS; TRAVELLING-BAGS, TOILET BAGS, RUCKSACKS, HANDBAGS, SHOPPING-BAGS, WALLETS, PURSES, MAP-CASES, CIGARETTE-CASES, TOBACCO-POUCHES, TOOL BAGS, SPORTS BAGS, BOTTLE-CASES, JEWELLERY BOXES. POWDER-BOXES. CUTLERY-CASES AND SIMILAR CONTAINERS. OF LEATHER OR OF COMPOSITION LEATHER, OF PLASTIC SHEETING, OF TEXTILE MATERIALS, OF VULCANISED FIBRE OR OF PAPERBOARD, OR WHOLLY OR MAINLY COVERED WITH SUCH MATERIALS: TRUNKS, SUIT-CASES, VANITY-CASES, EXECUTIVE-CASES, BRIEF-CASES, SCHOOL SATCHELS, SPECTACLE CASES, BINOCULAR CASES, CAMERA CASES, MUSICAL INSTRUMENT CASES, GUN CASES, HOLSTERS AND SIMILAR CONTAINERS; TRAVELLING-BAGS, TOILET BAGS, RUCKSACKS, HANDBAGS, SHOPPING-BAGS, WALLETS, PURSES, MAP-CASES, CIGARETTE-CASES, TOBACCO-POUCHES, TOOL BAGS, SPORTS BAGS, BOTTLE-CASES, JEWELLERY BOXES. POWDER-BOXES. CUTLERY-CASES AND SIMILAR CONTAINERS. OF LEATHER OR OF COMPOSITION LEATHER, OF PLASTIC SHEETING, OF TEXTILE MATERIALS, OF VULCANISED FIBRE OR OF PAPERBOARD, OR WHOLLY OR MAINLY COVERED WITH SUCH MATERIALS: TRUNKS, SUIT-CASES, VANITY-CASES, EXECUTIVE-CASES, BRIEF-CASES, SCHOOL SATCHELS, SPECTACLE CASES, BINOCULAR CASES, CAMERA CASES, MUSICAL INSTRUMENT CASES, GUN CASES, HOLSTERS AND SIMILAR CONTAINERS; TRAVELLING-BAGS, TOILET BAGS, RUCKSACKS, HANDBAGS, SHOPPING-BAGS, WALLETS, PURSES, MAP-CASES, CIGARETTE-CASES, TOBACCO-POUCHES, TOOL BAGS, SPORTS BAGS, BOTTLE-CASES, JEWELLERY BOXES. POWDER-BOXES. CUTLERY-CASES AND SIMILAR CONTAINERS. OF LEATHER OR OF COMPOSITION LEATHER, OF PLASTIC SHEETING, OF TEXTILE MATERIALS, OF VULCANISED FIBRE OR OF PAPERBOARD, OR WHOLLY OR MAINLY COVERED WITH SUCH MATERIALS: TRUNKS, SUIT-CASES, VANITY-CASES, EXECUTIVE-CASES, BRIEF-CASES, SCHOOL SATCHELS, SPECTACLE CASES, BINOCULAR CASES, CAMERA CASES, MUSICAL INSTRUMENT CASES, GUN CASES, HOLSTERS AND SIMILAR CONTAINERS; TRAVELLING-BAGS, TOILET BAGS, RUCKSACKS, HANDBAGS, SHOPPING-BAGS, WALLETS, PURSES, MAP-CASES, CIGARETTE-CASES, TOBACCO-POUCHES, TOOL BAGS, SPORTS BAGS, BOTTLE-CASES, JEWELLERY BOXES. POWDER-BOXES. CUTLERY-CASES AND SIMILAR CONTAINERS. OF LEATHER OR OF COMPOSITION LEATHER, OF PLASTIC SHEETING, OF TEXTILE MATERIALS, OF VULCANISED FIBRE OR OF PAPERBOARD, OR WHOLLY OR MAINLY COVERED WITH SUCH MATERIALS:
4202.1 4202.1 - Trunks, suit-cases, vanity-cases, executive-cases, brief-cases, school satchels and similar containers:
- Trunks, suit-cases, vanity-cases, executive-cases, brief-cases, school satchels and similar containers:
4202.11 4202.11 - - With outer surface of leather, of composition leather or of patent leather
4202.11.10 4202.11.10 - - - Brief-cases, portfolios and the like 20% 20% 20%
DC: 15% DC: 15% DC: 15%

SCHEDULE—continued
From 1 January 1989 15%
DC: 10%
4202.11.90 - - - Other 15%
DC: 10%
4202.12 - - With outer surface of plastics or of textile materials:
4202.12.10 - - - Goods, as follows: 20%
(a) attache or executive-cases; (b) brief-cases, portfolios and the like; (c) suit-cases; (d) trunks DC: 15%
(a) attache or executive-cases; (b) brief-cases, portfolios and the like; (c) suit-cases; (d) trunks
(a) attache or executive-cases; (b) brief-cases, portfolios and the like; (c) suit-cases; (d) trunks
(a) attache or executive-cases; (b) brief-cases, portfolios and the like; (c) suit-cases; (d) trunks
From 1 January 1989 15%
DC: 10%
4202.12.90 - - - Other 15%
DC: 10%
4202.19 - - Other
4202.19.10 - - - Goods, as follows: 20%
(a) attache or executive-cases; (b) brief-cases, portfolios and the like; (c) suit-cases; (d) trunks DC: 15%
(a) attache or executive-cases; (b) brief-cases, portfolios and the like; (c) suit-cases; (d) trunks
(a) attache or executive-cases; (b) brief-cases, portfolios and the like; (c) suit-cases; (d) trunks
(a) attache or executive-cases; (b) brief-cases, portfolios and the like; (c) suit-cases; (d) trunks
From 1 January 1989 15%
DC: 10%
4202.19.90 - - - Other 15%
DC: 10%
4202.2 - Handbags, whether or not with shoulder strap, including those without handle:
4202.21.00 - - With outer surface of leather, of composition leather or of patent leather 20%
- - With outer surface of leather, of composition leather or of patent leather DC: 15%
From 1 January 1989 15%
DC: 10%
4202.22.00 - - With outer surface of plastic sheeting or of textile materials 20%
- - With outer surface of plastic sheeting or of textile materials DC: 15%
From 1 January 1989 15%
DC: 10%
4202.29.00 - - Other 20%
DC: 15%
From 1 January 1989 15%
DC: 10%
4202.3 - Articles of a kind normally carried in the pocket or in the handbag:
- Articles of a kind normally carried in the pocket or in the handbag:
420131 - - With outer surface of leather, of composition leather or of patent leather:
4202.31.10 - - - Goods, as follows: 20%
(a) billfolds; DC: 15%
(b) coin purses;
(c) key containers;
(d) smoking requisites;
(e) spectacle cases;
(f) wallets and wallet-purses
From 1 January 1989 15%
DC: 10%
4202.31.90 - - - Other 15%
DC: 10%
4202.32 - - With outer surface of plastic sheeting or of textile materials:
4202.32.10 - - - Goods, as follows: 20%
(a) billfolds; DC: 15%
(b) coin purses;
(c) key containers;
(d) smoking requisites;
(e) spectacle cases;
(f) wallets and wallet-purses
From 1 January 1989 15%
DC: 10%
4202.32.90 - - - Other 15%
DC: 10%
4202.39.00 - - Other 15%
DC: 10%
4202.9 - Other
4202.91 - - With outer surface of leather, of composition leather or of patent leather

SCHEDULE—continued
4202.91.10 - - - Goods, as follows: - - - Goods, as follows: 20% 20%
(a) golf bags; (a) golf bags; DC: 15% DC: 15%
(b) gun, revolver and pistol cases and covers; (b) gun, revolver and pistol cases and covers;
(c) pen and pencil cases (c) pen and pencil cases
From 1 January 1989 From 1 January 1989 15% 15%
DC: 10% DC: 10%
4202.91.90 - - - Other - - - Other 15% 15%
DC: 10% DC: 10%
4202.92 - - With outer surface of plastic sheeting or of textile materials: - - With outer surface of plastic sheeting or of textile materials:
4202.92.10 - - - Goods, as follows: - - - Goods, as follows: 20% 20%
(a) golf bags; (a) golf bags; DC: 15% DC: 15%
(b) gun, revolver and pistol cases and covers; (b) gun, revolver and pistol cases and covers;
(c) pen and pencil cases (c) pen and pencil cases
From 1 January 1989 From 1 January 1989 15% 15%
DC: 10% DC: 10%
4202.92.90 - - - Other - - - Other 15% 15%
DC: 10% DC: 10%
4202.99.00 - - Other - - Other 15% 15%
DC: 10%” DC: 10%”
48. Omit 4407.10.91. substitute: Omit 4407.10.91. substitute: Omit 4407.10.91. substitute:
“4407.10.91 - - - - Wood, as follows: - - - - Wood, as follows: 2%”. 2%”.
(a) redwood (Sequoia sempervirens); (a) redwood (Sequoia sempervirens);
(b) western red cedar (Thuja plicata); (b) western red cedar (Thuja plicata);
(c) cut to size for making staves; (c) cut to size for making staves;
(d) having a cross-sectional area of 450 cm2 or greater (d) having a cross-sectional area of 450 cm2 or greater
49. Omit Chapter heading to Chapter 46, substitute: Omit Chapter heading to Chapter 46, substitute: Omit Chapter heading to Chapter 46, substitute:
“Manufactures of straw, of esparto or of other plaiting materials; basketware and wickerwork.”. “Manufactures of straw, of esparto or of other plaiting materials; basketware and wickerwork.”. “Manufactures of straw, of esparto or of other plaiting materials; basketware and wickerwork.”. “Manufactures of straw, of esparto or of other plaiting materials; basketware and wickerwork.”. “Manufactures of straw, of esparto or of other plaiting materials; basketware and wickerwork.”.
50. After Subheading Note 2 to Section XI, insert: After Subheading Note 2 to Section XI, insert: After Subheading Note 2 to Section XI, insert:
“Additional Notes. “Additional Notes. “Additional Notes.
1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”.
1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”.
1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”.
1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”.
1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”.
1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”.
1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”.
1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”.
1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”.
1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”.
1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”.
1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”.
1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”.
1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”.
1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”.
1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”.
1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”. 1.-For the purposes of this Section, fabric shall be taken to be printed if, and only if, the fabric— (a) has been printed in a manner that produces over the whole of the fabric a designed or patterned effect employing contrasts in colours; (b) complies with the following fastness standards determined by the test methods published by the Standards Association of Australia: (i) AS 2001.4.15 Test A with a minimum standard for change of shade of 3-4; and (ii) AS 2001.4.21 using MBTF lamp with a minimum standard of 3-4; and (c) has a colour contrast of not less than that shown by Grade 2 on the Standard Textile Grey Scale for assessing change in colour when viewed at a distance of 2 m in accordance with the viewing conditions as set out in Standards Association of Australia Standard AS 2001.4.1. 2.-Notwithstanding Note 1, fabrics shall not be taken to be printed by reason only of- (a) the printing of labels or the printing with words, letters, figures or designs suitable for cutting up into labels; (b) the printing with markings of any kind that are for identification or distinguishing purposes only; (c) the printing with markings of any kind solely or principally at or near one or both selvedges; (d) the printing with markings of any kind, which, excluding unprinted areas within such markings, do not exceed 10% of the total area of the fabric; (e) the printing in an uninterrupted single colour in a manner so that such printing exceeds 70% of the total area of the fabric; or (f) the printing solely in white or a shade of white so that it closely resembles the natural colour of the fabric in its grey state.”.
51. Omit 5106 to 5108, substitute: Omit 5106 to 5108, substitute: Omit 5106 to 5108, substitute:
“5106 “5106 YARN OF CARDED WOOL, NOT PUT UP FOR RETAIL SALE:
5106.10.00 5106.10.00 - Containing 85% or more by weight of wool 15% 15%
DC: 10% DC: 10%
5106.20.00 5106.20.00 - Containing less than 85% by weight of wool 15% 15%
5106.20.00 5106.20.00 - Containing less than 85% by weight of wool DC: 10% DC: 10%
5107 5107 YARN OF COMBED WOOL, NOT PUT UP FOR RETAIL SALE:
5107.10.00 5107.10.00 - Containing 85% or more by weight of wool 15% 15%
5107.10.00 5107.10.00 - Containing 85% or more by weight of wool DC: 10% DC: 10%

SCHEDULE—continued
5107.20.00 - Containing less than 85% by weight of wool - Containing less than 85% by weight of wool 15% 15%
DC: 10% DC: 10%
5108 YARN OF FINE ANIMAL HAIR (CARDED OR COMBED). NOT PUT UP FOR RETAIL SALE: YARN OF FINE ANIMAL HAIR (CARDED OR COMBED). NOT PUT UP FOR RETAIL SALE:
YARN OF FINE ANIMAL HAIR (CARDED OR COMBED). NOT PUT UP FOR RETAIL SALE: YARN OF FINE ANIMAL HAIR (CARDED OR COMBED). NOT PUT UP FOR RETAIL SALE:
5108.10.00 - Carded - Carded 15% 15%
DC: 10% DC: 10%
5108.20.00 - Combed - Combed 15% 15%
DC: 10%’ DC: 10%’ DC: 10%’
52. Omit 5205 and 5206. substitute: 52. Omit 5205 and 5206. substitute: 52. Omit 5205 and 5206. substitute:
“5205 COTTON YARN (OTHER THAN SEWING THREAD), CONTAINING 85% OR MORE BY WEIGHT OF COTTON, NOT PUT UP FOR RETAIL SALE: COTTON YARN (OTHER THAN SEWING THREAD), CONTAINING 85% OR MORE BY WEIGHT OF COTTON, NOT PUT UP FOR RETAIL SALE:
5205.1 - Single yarn, of uncombed fibres: - Single yarn, of uncombed fibres:
5205.11.00 - - Measuring 714.29 decitex or more (not exceeding 14 metric number) - - Measuring 714.29 decitex or more (not exceeding 14 metric number) 15% 15%
- - Measuring 714.29 decitex or more (not exceeding 14 metric number) - - Measuring 714.29 decitex or more (not exceeding 14 metric number) DC: 10% DC: 10%
5205.12.00 - - Measuring less than 714.29 decitex but not less than 232.56 decitex (exceeding 14 metric number but not exceeding 43 metric number) - - Measuring less than 714.29 decitex but not less than 232.56 decitex (exceeding 14 metric number but not exceeding 43 metric number) 15% 15%
- - Measuring less than 714.29 decitex but not less than 232.56 decitex (exceeding 14 metric number but not exceeding 43 metric number) - - Measuring less than 714.29 decitex but not less than 232.56 decitex (exceeding 14 metric number but not exceeding 43 metric number) DC: 10% DC: 10%
5205.13.00 - - Measuring less than 232.56 decitex but not less than 192.31 decitex (exceeding 43 metric number but not exceeding 52 metric number) - - Measuring less than 232.56 decitex but not less than 192.31 decitex (exceeding 43 metric number but not exceeding 52 metric number) 15% 15%
- - Measuring less than 232.56 decitex but not less than 192.31 decitex (exceeding 43 metric number but not exceeding 52 metric number) - - Measuring less than 232.56 decitex but not less than 192.31 decitex (exceeding 43 metric number but not exceeding 52 metric number) DC: 10% DC: 10%
5205.14.00 - - Measuring less than 192.31 decitex but not less than 125 decitex (exceeding 52 metric number but not exceeding 80 metric number) - - Measuring less than 192.31 decitex but not less than 125 decitex (exceeding 52 metric number but not exceeding 80 metric number) 15% 15%
- - Measuring less than 192.31 decitex but not less than 125 decitex (exceeding 52 metric number but not exceeding 80 metric number) - - Measuring less than 192.31 decitex but not less than 125 decitex (exceeding 52 metric number but not exceeding 80 metric number) DC: 10% DC: 10%
5205.15.00 - - Measuring less than 125 decitex (exceeding 80 metric number) - - Measuring less than 125 decitex (exceeding 80 metric number) 15% 15%
DC: 10% DC: 10%
5205.2 - Single yarn, of combed fibres: - Single yarn, of combed fibres:
5205.21.00 - - Measuring 714.29 decitex or more (not exceeding 14 metric number) - - Measuring 714.29 decitex or more (not exceeding 14 metric number) 15% 15%
- - Measuring 714.29 decitex or more (not exceeding 14 metric number) - - Measuring 714.29 decitex or more (not exceeding 14 metric number) DC: 10% DC: 10%
5205.22.00 - - Measuring less than 714.29 decitex but not less than 232.56 decitex (exceeding 14 metric number but not exceeding 43 metric number) - - Measuring less than 714.29 decitex but not less than 232.56 decitex (exceeding 14 metric number but not exceeding 43 metric number) 15% 15%
- - Measuring less than 714.29 decitex but not less than 232.56 decitex (exceeding 14 metric number but not exceeding 43 metric number) - - Measuring less than 714.29 decitex but not less than 232.56 decitex (exceeding 14 metric number but not exceeding 43 metric number) DC: 10% DC: 10%
5205.23.00 - - Measuring less than 232.56 decitex but not less than 192.31 decitex (exceeding 43 metric number but not exceeding 52 metric number) - - Measuring less than 232.56 decitex but not less than 192.31 decitex (exceeding 43 metric number but not exceeding 52 metric number) 15% 15%
- - Measuring less than 232.56 decitex but not less than 192.31 decitex (exceeding 43 metric number but not exceeding 52 metric number) - - Measuring less than 232.56 decitex but not less than 192.31 decitex (exceeding 43 metric number but not exceeding 52 metric number) DC: 10% DC: 10%
5205.24.00 - - Measuring less than 192.31 decitex but not less than 125 decitex (exceeding 52 metric number but not exceeding 80 metric number) - - Measuring less than 192.31 decitex but not less than 125 decitex (exceeding 52 metric number but not exceeding 80 metric number) 15% 15%
- - Measuring less than 192.31 decitex but not less than 125 decitex (exceeding 52 metric number but not exceeding 80 metric number) - - Measuring less than 192.31 decitex but not less than 125 decitex (exceeding 52 metric number but not exceeding 80 metric number) DC: 10% DC: 10%
5205.25.00 - - Measuring less than 125 decitex (exceeding 80 metric number) - - Measuring less than 125 decitex (exceeding 80 metric number) 15% 15%
DC: 10% DC: 10%
5205.3 - Multiple (folded) or cabled yarn, of uncombed fibres: - Multiple (folded) or cabled yarn, of uncombed fibres:
5205.31.00 - - Measuring per single yarn 714.29 decitex or more (not exceeding 14 metric number per single yarn) - - Measuring per single yarn 714.29 decitex or more (not exceeding 14 metric number per single yarn) 15% 15%
- - Measuring per single yarn 714.29 decitex or more (not exceeding 14 metric number per single yarn) - - Measuring per single yarn 714.29 decitex or more (not exceeding 14 metric number per single yarn) DC: 10% DC: 10%
5205.32.00 - - Measuring per single yarn less than 714.29 decitex but not less than 232.56 decitex (exceeding 14 metric number but not exceeding 43 metric number per single yarn) - - Measuring per single yarn less than 714.29 decitex but not less than 232.56 decitex (exceeding 14 metric number but not exceeding 43 metric number per single yarn) 15% 15%
DC: 10% DC: 10%
5205.33.00 - - Measuring per single yarn less than 232.56 decitex but not less than 192.31 decitex (exceeding 43 metric number but not exceeding 52 metric number per single yarn) - - Measuring per single yarn less than 232.56 decitex but not less than 192.31 decitex (exceeding 43 metric number but not exceeding 52 metric number per single yarn) 15% 15%
DC: 10% DC: 10%
5205.34.00 - - Measuring per single yarn less than 192.31 decitex but not less than 125 decitex (exceeding 52 metric number but not exceeding 80 metric number per single yarn) - - Measuring per single yarn less than 192.31 decitex but not less than 125 decitex (exceeding 52 metric number but not exceeding 80 metric number per single yarn) 15% 15%
- - Measuring per single yarn less than 192.31 decitex but not less than 125 decitex (exceeding 52 metric number but not exceeding 80 metric number per single yarn) - - Measuring per single yarn less than 192.31 decitex but not less than 125 decitex (exceeding 52 metric number but not exceeding 80 metric number per single yarn) DC: 10% DC: 10%
5205.35.00 - - Measuring per single yarn less than 125 decitex (exceeding 80 metric number per single yarn) - - Measuring per single yarn less than 125 decitex (exceeding 80 metric number per single yarn) 15% 15%
- - Measuring per single yarn less than 125 decitex (exceeding 80 metric number per single yarn) - - Measuring per single yarn less than 125 decitex (exceeding 80 metric number per single yarn) DC: 10% DC: 10%
5205.4 - Multiple (folded) or cabled yarn, of combed fibres: - Multiple (folded) or cabled yarn, of combed fibres:
5205.41.00 - - Measuring per single yarn 714.29 decitex or more (not exceeding 14 metric number per single yarn) - - Measuring per single yarn 714.29 decitex or more (not exceeding 14 metric number per single yarn) 15% 15%
- - Measuring per single yarn 714.29 decitex or more (not exceeding 14 metric number per single yarn) - - Measuring per single yarn 714.29 decitex or more (not exceeding 14 metric number per single yarn) DC: 10% DC: 10%
5205.42.00 - - Measuring per single yam less than 714.29 decitex but not less than 232.56 decitex (exceeding 14 metric number but not exceeding 43 metric number per single yarn) - - Measuring per single yam less than 714.29 decitex but not less than 232.56 decitex (exceeding 14 metric number but not exceeding 43 metric number per single yarn) 15% 15%
DC: 10% DC: 10%
5205.43.00 - - Measuring per single yarn less than 232.56 decitex but not less than 192.31 decitex (exceeding 43 metric number but not exceeding 52 metric number per single yarn) - - Measuring per single yarn less than 232.56 decitex but not less than 192.31 decitex (exceeding 43 metric number but not exceeding 52 metric number per single yarn) 15% 15%
DC: 10% DC: 10%
5205.44.00 - - Measuring per single yarn less than 192.31 decitex but not less than 125 decitex (exceeding 52 metric number but not exceeding 80 metric number per single yarn) - - Measuring per single yarn less than 192.31 decitex but not less than 125 decitex (exceeding 52 metric number but not exceeding 80 metric number per single yarn) 15% 15%
DC: 10% DC: 10%
5205.45.00 - - Measuring per single yarn less than 125 decitex (exceeding 80 metric number per single yarn) - - Measuring per single yarn less than 125 decitex (exceeding 80 metric number per single yarn) - - Measuring per single yarn less than 125 decitex (exceeding 80 metric number per single yarn) 15%
DC: 10% DC: 10%
5206 COTTON YARN (OTHER THAN SEWING THREAD), CONTAINING LESS THAN 85% BY WEIGHT OF COTTON, NOT PUT UP FOR RETAIL SALE: COTTON YARN (OTHER THAN SEWING THREAD), CONTAINING LESS THAN 85% BY WEIGHT OF COTTON, NOT PUT UP FOR RETAIL SALE:
COTTON YARN (OTHER THAN SEWING THREAD), CONTAINING LESS THAN 85% BY WEIGHT OF COTTON, NOT PUT UP FOR RETAIL SALE: COTTON YARN (OTHER THAN SEWING THREAD), CONTAINING LESS THAN 85% BY WEIGHT OF COTTON, NOT PUT UP FOR RETAIL SALE:

SCHEDULE—continued
5206.1 - Single yarn, of uncombed fibres:
5206.11.00 - - Measuring 714.29 decitex or more (not exceeding 14 metric number) 15%
- - Measuring 714.29 decitex or more (not exceeding 14 metric number) DC: 10%
5206.12.00 - - Measuring less than 714.29 decitex but not less than 232.56 decitex (exceeding 14 metric number but not exceeding 43 metric number) 15%
- - Measuring less than 714.29 decitex but not less than 232.56 decitex (exceeding 14 metric number but not exceeding 43 metric number) DC: 10%
5206.13.00 - - Measuring less than 232.56 decitex but not less than 192.31 decitex (exceeding 43 metric number but not exceeding 52 metric number) 15%
- - Measuring less than 232.56 decitex but not less than 192.31 decitex (exceeding 43 metric number but not exceeding 52 metric number) DC: 10%
5206.14.00 - - Measuring less than 192.31 decitex but not less than 125 decitex (exceeding 52 metric number but not exceeding 80 metric number) 15%
- - Measuring less than 192.31 decitex but not less than 125 decitex (exceeding 52 metric number but not exceeding 80 metric number) DC: 10%
5206.15.00 - - Measuring less than 125 decitex (exceeding 80 metric number) 15%
DC: 10%
5206.2 - Single yarn, of combed fibres:
5206.21.00 - - Measuring 714.29 decitex or more (not exceeding 14 metric number) 15%
- - Measuring 714.29 decitex or more (not exceeding 14 metric number) DC: 10%
5206.22.00 - - Measuring less than 714.29 decitex but not less than 232.56 decitex (exceeding 14 metric number but not exceeding 43 metric number) 15%
- - Measuring less than 714.29 decitex but not less than 232.56 decitex (exceeding 14 metric number but not exceeding 43 metric number) DC: 10%
5206.23.00 - - Measuring less than 232.56 decitex but not less than 192.31 decitex (exceeding 43 metric number but not exceeding 52 metric number) 15%
- - Measuring less than 232.56 decitex but not less than 192.31 decitex (exceeding 43 metric number but not exceeding 52 metric number) DC: 10%
5206.24.00 - - Measuring less than 192.31 decitex but not less than 125 decitex (exceeding 52 metric number but not exceeding 80 metric number) 15%
- - Measuring less than 192.31 decitex but not less than 125 decitex (exceeding 52 metric number but not exceeding 80 metric number) DC: 10%
5206.25.00 - - Measuring less than 125 decitex (exceeding 80 metric number) 15%
DC: 10%
5206.3 - Multiple (folded) or cabled yarn, of uncombed fibres:
5206.31.00 - - Measuring per single yarn 714.29 decitex or more (not exceeding 14 metric number per single yarn) 15%
- - Measuring per single yarn 714.29 decitex or more (not exceeding 14 metric number per single yarn) DC: 10%
5206.32.00 - - Measuring per single yarn less than 714.29 decitex but not less than 232.56 decitex (exceeding 14 metric number but not exceeding 43 metric number per single yarn) 15%
- - Measuring per single yarn less than 714.29 decitex but not less than 232.56 decitex (exceeding 14 metric number but not exceeding 43 metric number per single yarn) DC: 10%
5206.33.00 - - Measuring per single yarn less than 232.56 decitex but not less than 192.31 decitex (exceeding 43 metric number but not exceeding 52 metric number per single yarn) 15%
- - Measuring per single yarn less than 232.56 decitex but not less than 192.31 decitex (exceeding 43 metric number but not exceeding 52 metric number per single yarn) DC: 10%
5206.34.00 - - Measuring per single yarn less than 192.31 decitex but not less than 125 decitex (exceeding 52 metric number but not exceeding 80 metric number per single yarn) 15%
- - Measuring per single yarn less than 192.31 decitex but not less than 125 decitex (exceeding 52 metric number but not exceeding 80 metric number per single yarn) DC: 10%
5206.35.00 - - Measuring per single yarn less than 125 decitex (exceeding 80 metric number per single yarn) 15%
- - Measuring per single yarn less than 125 decitex (exceeding 80 metric number per single yarn) DC: 10%
5206.4 - Multiple (folded) or cabled yarn, of combed fibres:
5206.41.00 - - Measuring per single yam 714.29 decitex or more (not exceeding 14 metric number per single yarn) 15%
- - Measuring per single yam 714.29 decitex or more (not exceeding 14 metric number per single yarn) DC: 10%
5206.42.00 - - Measuring per single yam less than 714.29 decitex but not less than 232.56 decitex (exceeding 14 metric number but not exceeding 43 metric number per single yarn) 15%
- - Measuring per single yam less than 714.29 decitex but not less than 232.56 decitex (exceeding 14 metric number but not exceeding 43 metric number per single yarn) DC: 10%
5206.43.00 - - Measuring per single yam less than 232.56 decitex but not less than 192.31 decitex (exceeding 43 metric number but not exceeding 52 metric number per single yarn) 15%
- - Measuring per single yam less than 232.56 decitex but not less than 192.31 decitex (exceeding 43 metric number but not exceeding 52 metric number per single yarn) DC: 10%
5206.44.00 - - Measuring per single yam less than 192.31 decitex but not less than 125 decitex (exceeding 52 metric number but not exceeding 80 metric number per single yarn) 15%
- - Measuring per single yam less than 192.31 decitex but not less than 125 decitex (exceeding 52 metric number but not exceeding 80 metric number per single yarn) DC: 10%
5206.45.00 - - Measuring per single yam less than 125 decitex (exceeding 80 metric number per single yarn) 15%
- - Measuring per single yam less than 125 decitex (exceeding 80 metric number per single yarn) DC: 10%”.
53. Omit 5306.20, substitute: 53. Omit 5306.20, substitute:
“5306.20.00 - Multiple (folded) or cabled 15%
DC: 10%”.
54. Omit 5402.3 and 5402.4. substitute: 54. Omit 5402.3 and 5402.4. substitute:
“5402.3 - Textured yarn:
5402.31.00 - - Of nylon or other polyamides, measuring per single yarn not more than 50 tex 15%
- - Of nylon or other polyamides, measuring per single yarn not more than 50 tex DC: 10%
5402.32.00 - - Of nylon or other polyamides, measuring per single yarn more than 50 tex 15%
- - Of nylon or other polyamides, measuring per single yarn more than 50 tex DC: 10%
5402.33.00 - - Of polyesters 15%
DC: 10%
5402.39.00 - - Other 15%
DC: 10%

SCHEDULE—continued
5402.4 - Other yarn, single, untwisted or with a twist not exceeding 50 turns per metre:
- Other yarn, single, untwisted or with a twist not exceeding 50 turns per metre:
5402.41.00 - - Of nylon or other polyamides 15%
- - Of nylon or other polyamides DC: 10%
5402.42.00 - - Of polyesters, partially oriented 15%
- - Of polyesters, partially oriented DC: 10%
5402.43.00 - - Of polyesters, other 15%
- - Of polyesters, other DC: 10%”.
55. 55. Omit 5402.49.90, substitute: Omit 5402.49.90, substitute:
“5402.49.90 - - - Other 15%
DC: 10%”.
56. Omit 5402.51.00 and 5402.52.00. substitute: 56. Omit 5402.51.00 and 5402.52.00. substitute: 56. Omit 5402.51.00 and 5402.52.00. substitute: 56. Omit 5402.51.00 and 5402.52.00. substitute:
“5402.51.00 “5402.51.00 - - Of nylon or other polyamides 15%
- - Of nylon or other polyamides DC: 10%
5402.52.00 5402.52.00 - - Of polyesters 15%
- - Of polyesters DC: 10%”.
57. Omit 5402.59.90, substitute: Omit 5402.59.90, substitute: Omit 5402.59.90, substitute:
“5402.59.90 “5402.59.90 - - - Other 15%
DC: 10%”.
58. Omit 5402.6, substitute: Omit 5402.6, substitute: Omit 5402.6, substitute:
“5402.6 “5402.6 - Other yarn, multiple (folded) or cabled:
5402.61.00 5402.61.00 - - Of nylon or other polyamides 15%
- - Of nylon or other polyamides DC: 10%
5402.62.00 5402.62.00 - - Of polyesters 15%
- - Of polyesters DC: 10%
5402.69.00 5402.69.00 - - Other 15%
DC: 10%”.
59. Omit 5403.20.00 to 5403.4, substitute: Omit 5403.20.00 to 5403.4, substitute: Omit 5403.20.00 to 5403.4, substitute:
“5403.20.00 “5403.20.00 - Textured yarn 15%
- Textured yarn DC: 10%
5403.3 5403.3 - Other yarn, single:
5403.31.00 5403.31.00 - - Of viscose rayon, untwisted or with a twist not exceeding 120 turns per metre 15%
- - Of viscose rayon, untwisted or with a twist not exceeding 120 turns per metre DC: 10%
5403.32.00 5403.32.00 - - Of viscose rayon, with a twist exceeding 120 turns per metre 15%
- - Of viscose rayon, with a twist exceeding 120 turns per metre DC: 10%
5403.33.00 5403.33.00 - - Of cellulose acetate 15%
DC: 10%
5403.39.00 5403.39.00 - - Other 15%
DC: 10%
5403.4 5403.4 - Other yarn, multiple (folded) or cabled:
5403.41.00 5403.41.00 - - Of viscose rayon 15%
- - Of viscose rayon DC: 10%
5403.42.00 5403.42.00 - - Of cellulose acetate 15%
DC: 10%
5403.49.00 5403.49.00 - - Other 15%
DC: 10%”
60. Omit 5501, substitute: Omit 5501, substitute: Omit 5501, substitute:
“5501 “5501 SYNTHETIC FILAMENT TOW:
5501.10 5501.10 - Of nylon or other polyamides:
5501.10.10 5501.10.10 - - - Goods, as follows: 25%
(a) coated or covered with plastics; (b) encased within a sheath of braided or plaited natural or synthetic fibres DC: 20%
5501.10.90 5501.10.90 - - - Other 2%
5501.20 5501.20 - Of polyesters:
5501.20.10 5501.20.10 - - - Goods, as follows: 25%
(a) coated or covered with plastics; (b) encased within a sheath of braided or plaited natural or synthetic fibres DC: 20%
5501.20.90 5501.20.90 - - - Other 2%
5501.30 5501.30 - Acrylic or modacrylic:
5501.30.10 5501.30.10 - - - Goods, as follows: 25%
(a) coated or covered with plastics; (b) encased within a sheath of braided or plaited natural or synthetic fibres DC: 20%
5501.30.90 5501.30.90 - - - Other 2%

SCHEDULE—continued
5501.90 - Other: - Other:
5501.90.10 - - - Goods, as follows: - - - Goods, as follows: 25%
(a) coated or covered with plastics; (b) encased within a sheath of braided or plaited natural or synthetic fibres (a) coated or covered with plastics; (b) encased within a sheath of braided or plaited natural or synthetic fibres DC: 20%
(a) coated or covered with plastics; (b) encased within a sheath of braided or plaited natural or synthetic fibres (a) coated or covered with plastics; (b) encased within a sheath of braided or plaited natural or synthetic fibres
5501.90.90 - - - Other - - - Other 2%”.
61. Omit 5509 and 5510, substitute: 61. Omit 5509 and 5510, substitute: 61. Omit 5509 and 5510, substitute:
“5509 YARN (OTHER THAN SEWING THREAD) OF SYNTHETIC STAPLE FIBRES, NOT PUT UP FOR RETAIL SALE: YARN (OTHER THAN SEWING THREAD) OF SYNTHETIC STAPLE FIBRES, NOT PUT UP FOR RETAIL SALE:
YARN (OTHER THAN SEWING THREAD) OF SYNTHETIC STAPLE FIBRES, NOT PUT UP FOR RETAIL SALE: YARN (OTHER THAN SEWING THREAD) OF SYNTHETIC STAPLE FIBRES, NOT PUT UP FOR RETAIL SALE:
5509.1 - Containing 85% or more by weight of staple fibres of nylon or other polyamides: - Containing 85% or more by weight of staple fibres of nylon or other polyamides:
5509.11.00 - - Single yarn - - Single yarn 15%
DC: 10%
5509.12.00 - - Multiple (folded) or cabled yarn - - Multiple (folded) or cabled yarn 15%
- - Multiple (folded) or cabled yarn - - Multiple (folded) or cabled yarn DC: 10%
5509.2 - Containing 85% or more by weight of polyester staple fibres: - Containing 85% or more by weight of polyester staple fibres:
5509.21.00 - - Single yarn - - Single yarn 15%
DC: 10%
5509.22.00 - - Multiple (folded) or cabled yarn - - Multiple (folded) or cabled yarn 15%
DC: 10%
5509.3 - Containing 85% or more by weight of acrylic or modacrylic staple fibres: - Containing 85% or more by weight of acrylic or modacrylic staple fibres:
5509.31.00 - - Single yarn - - Single yarn 15%
DC: 10%
5509.32.00 - - Multiple (folded) or cabled yarn - - Multiple (folded) or cabled yarn 15%
DC: 10%
5509.4 - Other yarn, containing 85% or more by weight of synthetic staple fibres: - Other yarn, containing 85% or more by weight of synthetic staple fibres:
5509.41.00 - - Single yarn - - Single yarn 15%
DC: 10%
5509.42.00 - - Multiple (folded) or cabled yarn - - Multiple (folded) or cabled yarn 15%
DC: 10%
5509.5 - Other yarn, of polyester staple fibres: - Other yarn, of polyester staple fibres:
5509.51.00 - - Mixed mainly or solely with artificial staple fibres - - Mixed mainly or solely with artificial staple fibres 15%
- - Mixed mainly or solely with artificial staple fibres - - Mixed mainly or solely with artificial staple fibres DC: 10%
5509.52.00 - - Mixed mainly or solely with wool or fine animal hair - - Mixed mainly or solely with wool or fine animal hair 15%
- - Mixed mainly or solely with wool or fine animal hair - - Mixed mainly or solely with wool or fine animal hair DC: 10%
5509.53.00 - - Mixed mainly or solely with cotton - - Mixed mainly or solely with cotton 15%
DC: 10%
5509.59.00 - - Other - - Other 15%
DC: 10%
5509.6 - Other yarn, of acrylic or modacrylic staple fibres: - Other yarn, of acrylic or modacrylic staple fibres:
5509.61.00 - - Mixed mainly or solely with wool or fine animal hair - - Mixed mainly or solely with wool or fine animal hair 15%
- - Mixed mainly or solely with wool or fine animal hair - - Mixed mainly or solely with wool or fine animal hair DC: 10%
5509.62.00 - - Mixed mainly or solely with cotton - - Mixed mainly or solely with cotton 15%
- - Mixed mainly or solely with cotton - - Mixed mainly or solely with cotton DC: 10%
5509.69.00 - - Other - - Other 15%
DC: 10%
5509.9 - Other yarn: - Other yarn:
5509.91.00 - - Mixed mainly or solely with wool or fine animal hair - - Mixed mainly or solely with wool or fine animal hair 15%
- - Mixed mainly or solely with wool or fine animal hair - - Mixed mainly or solely with wool or fine animal hair DC: 10%
5509.92.00 - - Mixed mainly or solely with cotton - - Mixed mainly or solely with cotton 15%
- - Mixed mainly or solely with cotton - - Mixed mainly or solely with cotton DC: 10%
5509.99.00 - - Other - - Other 15%
DC: 10%
5510 YARN (OTHER THAN SEWING THREAD) OF ARTIFICIAL STAPLE FIBRES. NOT PUT UP FOR RETAIL SALE: YARN (OTHER THAN SEWING THREAD) OF ARTIFICIAL STAPLE FIBRES. NOT PUT UP FOR RETAIL SALE:
YARN (OTHER THAN SEWING THREAD) OF ARTIFICIAL STAPLE FIBRES. NOT PUT UP FOR RETAIL SALE: YARN (OTHER THAN SEWING THREAD) OF ARTIFICIAL STAPLE FIBRES. NOT PUT UP FOR RETAIL SALE:
5510.1 - Containing 85% or more by weight of artificial staple fibres: - Containing 85% or more by weight of artificial staple fibres:
5510.11.00 - - Single yarn - - Single yarn 15%
DC: 10%
5510.12.00 - - Multiple (folded) or cabled yarn - - Multiple (folded) or cabled yarn 15%
DC: 10%
5510.20.00 - Other yarn, mixed mainly or solely with wool or fine animal hair - Other yarn, mixed mainly or solely with wool or fine animal hair 15%
- Other yarn, mixed mainly or solely with wool or fine animal hair - Other yarn, mixed mainly or solely with wool or fine animal hair DC: 10%
5510.30.00 - Other yarn, mixed mainly or solely with cotton - Other yarn, mixed mainly or solely with cotton 15%
DC: 10%
5510.90.00 - Other yarn - Other yarn 15%
DC: 10%’
62. Omit 5515.29.00, substitute: 62. Omit 5515.29.00, substitute: 62. Omit 5515.29.00, substitute:
“5515.29.00 “5515.29.00 - - Other Sch. 5”.

SCHEDULE—continued
63. Omit 5601.10.00, substitute: Omit 5601.10.00, substitute: Omit 5601.10.00, substitute:
“5601.10.00 - Sanitary towels and tampons, napkins and napkin liners for babies and similar sanitary articles, of wadding - Sanitary towels and tampons, napkins and napkin liners for babies and similar sanitary articles, of wadding 2%”.
- Sanitary towels and tampons, napkins and napkin liners for babies and similar sanitary articles, of wadding - Sanitary towels and tampons, napkins and napkin liners for babies and similar sanitary articles, of wadding
64. Omit 5604, substitute: Omit 5604, substitute: Omit 5604, substitute:
“5604 RUBBER THREAD AND CORD, TEXTILE COVERED; TEXTILE YARN, AND STRIP AND THE LIKE OF 5404 OR 5405.00.00, IMPREGNATED, COATED, COVERED OR SHEATHED WITH RUBBER OR PLASTICS: RUBBER THREAD AND CORD, TEXTILE COVERED; TEXTILE YARN, AND STRIP AND THE LIKE OF 5404 OR 5405.00.00, IMPREGNATED, COATED, COVERED OR SHEATHED WITH RUBBER OR PLASTICS:
RUBBER THREAD AND CORD, TEXTILE COVERED; TEXTILE YARN, AND STRIP AND THE LIKE OF 5404 OR 5405.00.00, IMPREGNATED, COATED, COVERED OR SHEATHED WITH RUBBER OR PLASTICS: RUBBER THREAD AND CORD, TEXTILE COVERED; TEXTILE YARN, AND STRIP AND THE LIKE OF 5404 OR 5405.00.00, IMPREGNATED, COATED, COVERED OR SHEATHED WITH RUBBER OR PLASTICS:
RUBBER THREAD AND CORD, TEXTILE COVERED; TEXTILE YARN, AND STRIP AND THE LIKE OF 5404 OR 5405.00.00, IMPREGNATED, COATED, COVERED OR SHEATHED WITH RUBBER OR PLASTICS: RUBBER THREAD AND CORD, TEXTILE COVERED; TEXTILE YARN, AND STRIP AND THE LIKE OF 5404 OR 5405.00.00, IMPREGNATED, COATED, COVERED OR SHEATHED WITH RUBBER OR PLASTICS:
5604.10.00 - Rubber thread and cord, textile covered - Rubber thread and cord, textile covered 25%
FI: 15%
DC: 15%
5604.20 - High tenacity yarn of polyesters, of nylon or other polyamides or of viscose rayon, impregnated or coated: - High tenacity yarn of polyesters, of nylon or other polyamides or of viscose rayon, impregnated or coated:
- High tenacity yarn of polyesters, of nylon or other polyamides or of viscose rayon, impregnated or coated: - High tenacity yarn of polyesters, of nylon or other polyamides or of viscose rayon, impregnated or coated:
5604.20.10 - - - Imitation catgut - - - Imitation catgut 15%
5604.20.10 - - - Imitation catgut - - - Imitation catgut FI: 15%
DC: 15%
5604.20.90 - - - Other - - - Other 30%
DC: 20%
5604.90 - Other: - Other:
5604.90.10 - - - Imitation catgut - - - Imitation catgut 15%
5604.90.10 - - - Imitation catgut - - - Imitation catgut FI: 15%
DC: 15%
5604.90.90 - - - Other - - - Other 30%
DC: 20%”. DC: 20%”.
65. Omit 5609.00.00, substitute: Omit 5609.00.00, substitute: Omit 5609.00.00, substitute:
“5609 ARTICLES OF YARN, STRIP OR THE LIKE OF 5404 OR 5405.00.00, TWINE. CORDAGE, ROPE OR CABLES, NOT ELSEWHERE SPECIFIED OR INCLUDED: ARTICLES OF YARN, STRIP OR THE LIKE OF 5404 OR 5405.00.00, TWINE. CORDAGE, ROPE OR CABLES, NOT ELSEWHERE SPECIFIED OR INCLUDED:
ARTICLES OF YARN, STRIP OR THE LIKE OF 5404 OR 5405.00.00, TWINE. CORDAGE, ROPE OR CABLES, NOT ELSEWHERE SPECIFIED OR INCLUDED: ARTICLES OF YARN, STRIP OR THE LIKE OF 5404 OR 5405.00.00, TWINE. CORDAGE, ROPE OR CABLES, NOT ELSEWHERE SPECIFIED OR INCLUDED:
ARTICLES OF YARN, STRIP OR THE LIKE OF 5404 OR 5405.00.00, TWINE. CORDAGE, ROPE OR CABLES, NOT ELSEWHERE SPECIFIED OR INCLUDED: ARTICLES OF YARN, STRIP OR THE LIKE OF 5404 OR 5405.00.00, TWINE. CORDAGE, ROPE OR CABLES, NOT ELSEWHERE SPECIFIED OR INCLUDED:
5609.00.10 - - - Twine, cordage, rope and cables of polyethylene or polypropylene - - - Twine, cordage, rope and cables of polyethylene or polypropylene 25%
- - - Twine, cordage, rope and cables of polyethylene or polypropylene - - - Twine, cordage, rope and cables of polyethylene or polypropylene DC: Sch. 5
5609.00.90 - - - Other - - - Other 25%
DC: 20%”.
66. After Note 7 to Chapter 58 insert: After Note 7 to Chapter 58 insert: After Note 7 to Chapter 58 insert:
“Additional Note. “Additional Note. “Additional Note.
For the purposes of 5804, ‘lace’ does not include knitted fabrics.”. For the purposes of 5804, ‘lace’ does not include knitted fabrics.”. For the purposes of 5804, ‘lace’ does not include knitted fabrics.”.
67. Omit 5801.22.00, substitute: Omit 5801.22.00, substitute: Omit 5801.22.00, substitute:
“5801.22.00 - - Cut corduroy - - Cut corduroy 2%”.
68. Omit 5801.32.00, substitute: Omit 5801.32.00, substitute: Omit 5801.32.00, substitute:
“5801.32.00 - - Cut corduroy - - Cut corduroy 2%”.
69. Omit 5903.10.10, substitute: Omit 5903.10.10, substitute: Omit 5903.10.10, substitute:
“5903.10.10 - - - Goods with plastic addition of 34 g/m2 or less, as follows: - - - Goods with plastic addition of 34 g/m2 or less, as follows: Sch. 5”.
(a) having a woven base fabric of cotton, containing 20% or more by weight of man-made fibres; (b) having a woven base fabric of man-made fibres, other than of polyolefins (a) having a woven base fabric of cotton, containing 20% or more by weight of man-made fibres; (b) having a woven base fabric of man-made fibres, other than of polyolefins
(a) having a woven base fabric of cotton, containing 20% or more by weight of man-made fibres; (b) having a woven base fabric of man-made fibres, other than of polyolefins (a) having a woven base fabric of cotton, containing 20% or more by weight of man-made fibres; (b) having a woven base fabric of man-made fibres, other than of polyolefins
(a) having a woven base fabric of cotton, containing 20% or more by weight of man-made fibres; (b) having a woven base fabric of man-made fibres, other than of polyolefins (a) having a woven base fabric of cotton, containing 20% or more by weight of man-made fibres; (b) having a woven base fabric of man-made fibres, other than of polyolefins
70. Omit 5903.20.10, substitute: Omit 5903.20.10, substitute: Omit 5903.20.10, substitute:
“5903.20.10 - - - Having a woven base fabric, as follows: - - - Having a woven base fabric, as follows: Sch. 5”.
(a) of cotton, containing 20% or more by weight of man-made fibres; (b) of man-made fibres, other than of polyolefins (a) of cotton, containing 20% or more by weight of man-made fibres; (b) of man-made fibres, other than of polyolefins
(a) of cotton, containing 20% or more by weight of man-made fibres; (b) of man-made fibres, other than of polyolefins (a) of cotton, containing 20% or more by weight of man-made fibres; (b) of man-made fibres, other than of polyolefins
71. Omit 5903.90.10, substitute: Omit 5903.90.10, substitute: Omit 5903.90.10, substitute:
“5903.90.10 - - - Having a woven base fabric, as follows: - - - Having a woven base fabric, as follows: Sch. 5”.
(a) of cotton, containing 20% or more by weight of man-made fibres; (b) of man-made fibres, other than of polyolefins (a) of cotton, containing 20% or more by weight of man-made fibres; (b) of man-made fibres, other than of polyolefins
(a) of cotton, containing 20% or more by weight of man-made fibres; (b) of man-made fibres, other than of polyolefins (a) of cotton, containing 20% or more by weight of man-made fibres; (b) of man-made fibres, other than of polyolefins
72. Omit Additional Note 1 to Chapter 61, substitute: Omit Additional Note 1 to Chapter 61, substitute: Omit Additional Note 1 to Chapter 61, substitute:
“1- For the purposes of this Chapter: (a) goods shall, subject to sub-note (b), be deemed to be elastic or of elastic fibres if they consist of textile materials or textile fibres combined with rubber threads; and (b) goods shall not be deemed to be elastic by reason only for their containing rubber thread or elastic forming simply a supporting band. 2- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they “1- For the purposes of this Chapter: (a) goods shall, subject to sub-note (b), be deemed to be elastic or of elastic fibres if they consist of textile materials or textile fibres combined with rubber threads; and (b) goods shall not be deemed to be elastic by reason only for their containing rubber thread or elastic forming simply a supporting band. 2- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they “1- For the purposes of this Chapter: (a) goods shall, subject to sub-note (b), be deemed to be elastic or of elastic fibres if they consist of textile materials or textile fibres combined with rubber threads; and (b) goods shall not be deemed to be elastic by reason only for their containing rubber thread or elastic forming simply a supporting band. 2- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they
“1- For the purposes of this Chapter: (a) goods shall, subject to sub-note (b), be deemed to be elastic or of elastic fibres if they consist of textile materials or textile fibres combined with rubber threads; and (b) goods shall not be deemed to be elastic by reason only for their containing rubber thread or elastic forming simply a supporting band. 2- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they “1- For the purposes of this Chapter: (a) goods shall, subject to sub-note (b), be deemed to be elastic or of elastic fibres if they consist of textile materials or textile fibres combined with rubber threads; and (b) goods shall not be deemed to be elastic by reason only for their containing rubber thread or elastic forming simply a supporting band. 2- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they “1- For the purposes of this Chapter: (a) goods shall, subject to sub-note (b), be deemed to be elastic or of elastic fibres if they consist of textile materials or textile fibres combined with rubber threads; and (b) goods shall not be deemed to be elastic by reason only for their containing rubber thread or elastic forming simply a supporting band. 2- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they
“1- For the purposes of this Chapter: (a) goods shall, subject to sub-note (b), be deemed to be elastic or of elastic fibres if they consist of textile materials or textile fibres combined with rubber threads; and (b) goods shall not be deemed to be elastic by reason only for their containing rubber thread or elastic forming simply a supporting band. 2- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they “1- For the purposes of this Chapter: (a) goods shall, subject to sub-note (b), be deemed to be elastic or of elastic fibres if they consist of textile materials or textile fibres combined with rubber threads; and (b) goods shall not be deemed to be elastic by reason only for their containing rubber thread or elastic forming simply a supporting band. 2- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they “1- For the purposes of this Chapter: (a) goods shall, subject to sub-note (b), be deemed to be elastic or of elastic fibres if they consist of textile materials or textile fibres combined with rubber threads; and (b) goods shall not be deemed to be elastic by reason only for their containing rubber thread or elastic forming simply a supporting band. 2- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they
“1- For the purposes of this Chapter: (a) goods shall, subject to sub-note (b), be deemed to be elastic or of elastic fibres if they consist of textile materials or textile fibres combined with rubber threads; and (b) goods shall not be deemed to be elastic by reason only for their containing rubber thread or elastic forming simply a supporting band. 2- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they “1- For the purposes of this Chapter: (a) goods shall, subject to sub-note (b), be deemed to be elastic or of elastic fibres if they consist of textile materials or textile fibres combined with rubber threads; and (b) goods shall not be deemed to be elastic by reason only for their containing rubber thread or elastic forming simply a supporting band. 2- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they “1- For the purposes of this Chapter: (a) goods shall, subject to sub-note (b), be deemed to be elastic or of elastic fibres if they consist of textile materials or textile fibres combined with rubber threads; and (b) goods shall not be deemed to be elastic by reason only for their containing rubber thread or elastic forming simply a supporting band. 2- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they
“1- For the purposes of this Chapter: (a) goods shall, subject to sub-note (b), be deemed to be elastic or of elastic fibres if they consist of textile materials or textile fibres combined with rubber threads; and (b) goods shall not be deemed to be elastic by reason only for their containing rubber thread or elastic forming simply a supporting band. 2- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they “1- For the purposes of this Chapter: (a) goods shall, subject to sub-note (b), be deemed to be elastic or of elastic fibres if they consist of textile materials or textile fibres combined with rubber threads; and (b) goods shall not be deemed to be elastic by reason only for their containing rubber thread or elastic forming simply a supporting band. 2- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they “1- For the purposes of this Chapter: (a) goods shall, subject to sub-note (b), be deemed to be elastic or of elastic fibres if they consist of textile materials or textile fibres combined with rubber threads; and (b) goods shall not be deemed to be elastic by reason only for their containing rubber thread or elastic forming simply a supporting band. 2- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they
“1- For the purposes of this Chapter: (a) goods shall, subject to sub-note (b), be deemed to be elastic or of elastic fibres if they consist of textile materials or textile fibres combined with rubber threads; and (b) goods shall not be deemed to be elastic by reason only for their containing rubber thread or elastic forming simply a supporting band. 2- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they “1- For the purposes of this Chapter: (a) goods shall, subject to sub-note (b), be deemed to be elastic or of elastic fibres if they consist of textile materials or textile fibres combined with rubber threads; and (b) goods shall not be deemed to be elastic by reason only for their containing rubber thread or elastic forming simply a supporting band. 2- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they “1- For the purposes of this Chapter: (a) goods shall, subject to sub-note (b), be deemed to be elastic or of elastic fibres if they consist of textile materials or textile fibres combined with rubber threads; and (b) goods shall not be deemed to be elastic by reason only for their containing rubber thread or elastic forming simply a supporting band. 2- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they
“1- For the purposes of this Chapter: (a) goods shall, subject to sub-note (b), be deemed to be elastic or of elastic fibres if they consist of textile materials or textile fibres combined with rubber threads; and (b) goods shall not be deemed to be elastic by reason only for their containing rubber thread or elastic forming simply a supporting band. 2- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they “1- For the purposes of this Chapter: (a) goods shall, subject to sub-note (b), be deemed to be elastic or of elastic fibres if they consist of textile materials or textile fibres combined with rubber threads; and (b) goods shall not be deemed to be elastic by reason only for their containing rubber thread or elastic forming simply a supporting band. 2- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they “1- For the purposes of this Chapter: (a) goods shall, subject to sub-note (b), be deemed to be elastic or of elastic fibres if they consist of textile materials or textile fibres combined with rubber threads; and (b) goods shall not be deemed to be elastic by reason only for their containing rubber thread or elastic forming simply a supporting band. 2- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they
“1- For the purposes of this Chapter: (a) goods shall, subject to sub-note (b), be deemed to be elastic or of elastic fibres if they consist of textile materials or textile fibres combined with rubber threads; and (b) goods shall not be deemed to be elastic by reason only for their containing rubber thread or elastic forming simply a supporting band. 2- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they “1- For the purposes of this Chapter: (a) goods shall, subject to sub-note (b), be deemed to be elastic or of elastic fibres if they consist of textile materials or textile fibres combined with rubber threads; and (b) goods shall not be deemed to be elastic by reason only for their containing rubber thread or elastic forming simply a supporting band. 2- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they “1- For the purposes of this Chapter: (a) goods shall, subject to sub-note (b), be deemed to be elastic or of elastic fibres if they consist of textile materials or textile fibres combined with rubber threads; and (b) goods shall not be deemed to be elastic by reason only for their containing rubber thread or elastic forming simply a supporting band. 2- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they

SCHEDULE—continued
were not designed for use, or were not designed for use exclusively, as men’s or boys’ garments.”. were not designed for use, or were not designed for use exclusively, as men’s or boys’ garments.”. were not designed for use, or were not designed for use exclusively, as men’s or boys’ garments.”. were not designed for use, or were not designed for use exclusively, as men’s or boys’ garments.”. were not designed for use, or were not designed for use exclusively, as men’s or boys’ garments.”.
73. Omit 6101.30.90, substitute: Omit 6101.30.90, substitute: Omit 6101.30.90, substitute:
“6101.30.90 - - - Other - - - Other Sch. 5”. Sch. 5”. Sch. 5”.
74. Omit Additional Note 1 to Chapter 62, substitute: Omit Additional Note 1 to Chapter 62, substitute: Omit Additional Note 1 to Chapter 62, substitute:
“1- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they were not designed for use, or were not designed for use exclusively, as men’s or boys’ garments.”. “1- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they were not designed for use, or were not designed for use exclusively, as men’s or boys’ garments.”. “1- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they were not designed for use, or were not designed for use exclusively, as men’s or boys’ garments.”. “1- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they were not designed for use, or were not designed for use exclusively, as men’s or boys’ garments.”.
“1- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they were not designed for use, or were not designed for use exclusively, as men’s or boys’ garments.”. “1- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they were not designed for use, or were not designed for use exclusively, as men’s or boys’ garments.”. “1- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they were not designed for use, or were not designed for use exclusively, as men’s or boys’ garments.”. “1- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they were not designed for use, or were not designed for use exclusively, as men’s or boys’ garments.”.
“1- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they were not designed for use, or were not designed for use exclusively, as men’s or boys’ garments.”. “1- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they were not designed for use, or were not designed for use exclusively, as men’s or boys’ garments.”. “1- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they were not designed for use, or were not designed for use exclusively, as men’s or boys’ garments.”. “1- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they were not designed for use, or were not designed for use exclusively, as men’s or boys’ garments.”.
“1- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they were not designed for use, or were not designed for use exclusively, as men’s or boys’ garments.”. “1- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they were not designed for use, or were not designed for use exclusively, as men’s or boys’ garments.”. “1- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they were not designed for use, or were not designed for use exclusively, as men’s or boys’ garments.”. “1- For the purposes of this Chapter, garments designed for left over right closure at the front shall be taken to have been designed for use exclusively as men’s or boys’ garments except garments that have a characteristic that shows that they were not designed for use, or were not designed for use exclusively, as men’s or boys’ garments.”.
75. Omit 6305.31.90, substitute: Omit 6305.31.90, substitute: Omit 6305.31.90, substitute:
“6305.31.9 - - - Other - - - Other
6305.31.91 - - - New bags, woven wholly of polypropylene - - - New bags, woven wholly of polypropylene 40% 40% 40%
PNO:35% PNO:35% PNO:35%
FI: Sch. 5 FI: Sch. 5 FI: Sch. 5
DC:35% DC:35% DC:35%
6305.31.99 - - - Other - - - Other 40% 40% 40%
PNO: 35% PNO: 35% PNO: 35%
FI: 35% FI: 35% FI: 35%
76. DC: 35%”. DC: 35%”. DC: 35%”.
76. Omit 6305.39.90, substitute: Omit 6305.39.90, substitute: Omit 6305.39.90, substitute:
“6305.39.9 - - - Other - - - Other
6305.39.91 - - - New bags, woven wholly of polypropylene - - - New bags, woven wholly of polypropylene 40% 40% 40%
PNO: 33% PNO: 33% PNO: 33%
FI: Sch. 5 FI: Sch. 5 FI: Sch. 5
DC: 35% DC: 35% DC: 35%
6305.39.99 - - - Other - - - Other 40% 40% 40%
PNO: 35% PNO: 35% PNO: 35%
FI: 35% FI: 35% FI: 35%
DC: 35%”. DC: 35%”. DC: 35%”.
77. Omit 6807, substitute: Omit 6807, substitute: Omit 6807, substitute:
“6807 ARTICLES OF ASPHALT OR OF SIMILAR MATERIAL (FOR EXAMPLE, PETROLEUM BITUMEN OR COAL TAR PITCH): ARTICLES OF ASPHALT OR OF SIMILAR MATERIAL (FOR EXAMPLE, PETROLEUM BITUMEN OR COAL TAR PITCH):
ARTICLES OF ASPHALT OR OF SIMILAR MATERIAL (FOR EXAMPLE, PETROLEUM BITUMEN OR COAL TAR PITCH): ARTICLES OF ASPHALT OR OF SIMILAR MATERIAL (FOR EXAMPLE, PETROLEUM BITUMEN OR COAL TAR PITCH):
6807.10.00 - In rolls - In rolls 15% 15% 15%
DC: 10% DC: 10% DC: 10%
6807.90.00 - Other - Other 15% 15% 15%
78. DC: 10%”. DC: 10%”. DC: 10%”.
78. Omit 6912.00.00, substitute: Omit 6912.00.00, substitute: Omit 6912.00.00, substitute:
“6912.00.00 CERAMIC TABLEWARE, KITCHENWARE, OTHER HOUSEHOLD ARTICLES AND TOILET ARTICLES. OTHER THAN OF PORCELAIN OR CHINA 20% DC (except RKOR and TAIW): 15% RKOR and TAIW: 20% 20% DC (except RKOR and TAIW): 15% RKOR and TAIW: 20% 20% DC (except RKOR and TAIW): 15% RKOR and TAIW: 20% 20% DC (except RKOR and TAIW): 15% RKOR and TAIW: 20%
From 1 July 1988 From 1 July 1988 20% DC: 15%”. 20% DC: 15%”. 20% DC: 15%”.
79. Omit 7115.90.00, substitute: Omit 7115.90.00, substitute: Omit 7115.90.00, substitute:
“7115.90 - Other - Other
7115.90.10 - - - Chain of precious metal - - - Chain of precious metal 25% 25% 25%
7115.90.90 - - - Other - - - Other DC: 30% DC: 30% DC: 30%
7115.90.90 - - - Other - - - Other 2%”. 2%”. 2%”.
80. Omit sub-note 6 (b) to Section XV, substitute: Omit sub-note 6 (b) to Section XV, substitute: Omit sub-note 6 (b) to Section XV, substitute:
“(b) Powders Products of which 90% or more by weight pasta through a sieve having a mesh aperture of 1 mm.”. “(b) Powders Products of which 90% or more by weight pasta through a sieve having a mesh aperture of 1 mm.”. “(b) Powders Products of which 90% or more by weight pasta through a sieve having a mesh aperture of 1 mm.”. “(b) Powders Products of which 90% or more by weight pasta through a sieve having a mesh aperture of 1 mm.”. “(b) Powders Products of which 90% or more by weight pasta through a sieve having a mesh aperture of 1 mm.”.
“(b) Powders Products of which 90% or more by weight pasta through a sieve having a mesh aperture of 1 mm.”. “(b) Powders Products of which 90% or more by weight pasta through a sieve having a mesh aperture of 1 mm.”. “(b) Powders Products of which 90% or more by weight pasta through a sieve having a mesh aperture of 1 mm.”. “(b) Powders Products of which 90% or more by weight pasta through a sieve having a mesh aperture of 1 mm.”. “(b) Powders Products of which 90% or more by weight pasta through a sieve having a mesh aperture of 1 mm.”.
81. Omit sub-note 1 (1) to Chapter 72, substitute: Omit sub-note 1 (1) to Chapter 72, substitute: Omit sub-note 1 (1) to Chapter 72, substitute:
“(1) Bars and rods, hot-rolled, in irregularly wound coils Hot-rolled products in irregularly wound coils, which have a solid cross-section in the shape of circlet, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons. These products may have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods).”. “(1) Bars and rods, hot-rolled, in irregularly wound coils Hot-rolled products in irregularly wound coils, which have a solid cross-section in the shape of circlet, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons. These products may have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods).”. “(1) Bars and rods, hot-rolled, in irregularly wound coils Hot-rolled products in irregularly wound coils, which have a solid cross-section in the shape of circlet, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons. These products may have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods).”.
“(1) Bars and rods, hot-rolled, in irregularly wound coils Hot-rolled products in irregularly wound coils, which have a solid cross-section in the shape of circlet, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons. These products may have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods).”. “(1) Bars and rods, hot-rolled, in irregularly wound coils Hot-rolled products in irregularly wound coils, which have a solid cross-section in the shape of circlet, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons. These products may have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods).”. “(1) Bars and rods, hot-rolled, in irregularly wound coils Hot-rolled products in irregularly wound coils, which have a solid cross-section in the shape of circlet, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons. These products may have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods).”.
“(1) Bars and rods, hot-rolled, in irregularly wound coils Hot-rolled products in irregularly wound coils, which have a solid cross-section in the shape of circlet, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons. These products may have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods).”. “(1) Bars and rods, hot-rolled, in irregularly wound coils Hot-rolled products in irregularly wound coils, which have a solid cross-section in the shape of circlet, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons. These products may have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods).”. “(1) Bars and rods, hot-rolled, in irregularly wound coils Hot-rolled products in irregularly wound coils, which have a solid cross-section in the shape of circlet, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons. These products may have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods).”.
“(1) Bars and rods, hot-rolled, in irregularly wound coils Hot-rolled products in irregularly wound coils, which have a solid cross-section in the shape of circlet, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons. These products may have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods).”. “(1) Bars and rods, hot-rolled, in irregularly wound coils Hot-rolled products in irregularly wound coils, which have a solid cross-section in the shape of circlet, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons. These products may have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods).”. “(1) Bars and rods, hot-rolled, in irregularly wound coils Hot-rolled products in irregularly wound coils, which have a solid cross-section in the shape of circlet, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons. These products may have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods).”.
“(1) Bars and rods, hot-rolled, in irregularly wound coils Hot-rolled products in irregularly wound coils, which have a solid cross-section in the shape of circlet, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons. These products may have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods).”. “(1) Bars and rods, hot-rolled, in irregularly wound coils Hot-rolled products in irregularly wound coils, which have a solid cross-section in the shape of circlet, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons. These products may have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods).”. “(1) Bars and rods, hot-rolled, in irregularly wound coils Hot-rolled products in irregularly wound coils, which have a solid cross-section in the shape of circlet, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons. These products may have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods).”.

SCHEDULE—continued
82. Omit 7211.90.00, substitute: Omit 7211.90.00, substitute: Omit 7211.90.00, substitute:
“7211.90.00 - Other 10% FI:5% DC (except BRAZ, RKOR and TAIW): 5% BRAZ, RKOR and TAIW:10% 10% FI:5% DC (except BRAZ, RKOR and TAIW): 5% BRAZ, RKOR and TAIW:10%
From 1 January 1989 From 1 January 1989 10% Fl: 5% DC: 5%”.
83. Omit 7213.31.00, substitute: Omit 7213.31.00, substitute: Omit 7213.31.00, substitute:
“7213.31.00 - - Of circular cross-section measuring less than 14 mm in diameter - - Of circular cross-section measuring less than 14 mm in diameter 5%”.
84. Omit 7227.90.90, substitute: Omit 7227.90.90, substitute: Omit 7227.90.90, substitute:
“7227.90.90 - - - Other - - - Other 5%”.
85. Omit 8407.32.10, substitute: Omit 8407.32.10, substitute: Omit 8407.32.10, substitute:
“8407.32.10 - - - Engines, as follows: (a) or a kind used in vehicles or 8703; (b) having a power not exceeding 4.5 kW - - - Engines, as follows: (a) or a kind used in vehicles or 8703; (b) having a power not exceeding 4.5 kW 25% DC: 20%”.
86. Omit 8407.33.20, substitute: Omit 8407.33.20, substitute: Omit 8407.33.20, substitute:
“8407.33.20 - - - Engines, NSA. or a kind used with vehicles or 8702, 8703, 8704 or 8705 - - - Engines, NSA. or a kind used with vehicles or 8702, 8703, 8704 or 8705 15% DC: 10%”.
87. Omit 8407.34.20, substitute: Omit 8407.34.20, substitute: Omit 8407.34.20, substitute:
“8407.34.20 - - - Engines, NSA. or a kind used with vehicles or 8701.20.00, 8702, 8703, 8704 or 8705 - - - Engines, NSA. or a kind used with vehicles or 8701.20.00, 8702, 8703, 8704 or 8705 15% DC: 10%”.
88. Omit 8407.90.20, substitute: Omit 8407.90.20, substitute: Omit 8407.90.20, substitute:
“8407.90.20 - - - Engines, NSA, of a kind used with vehicles of 8701.20.00, 8702, 8703, 8704 or 8705 - - - Engines, NSA, of a kind used with vehicles of 8701.20.00, 8702, 8703, 8704 or 8705 15% DC: 10%
8407.90.30 - - - Engines, NSA, having a power not exceeding 4.5 kW - - - Engines, NSA, having a power not exceeding 4.5 kW 25% DC: 20%”.
89. Omit 8408.20.20, substitute: Omit 8408.20.20, substitute: Omit 8408.20.20, substitute:
“8408.20.20 - - - Engines, NSA, of a kind used with vehicles of 8701.20.00, 8702. 8703, 8704 or 8705 - - - Engines, NSA, of a kind used with vehicles of 8701.20.00, 8702. 8703, 8704 or 8705 15% DC: 10%”.
90. Omit 8409.91.10, substitute: Omit 8409.91.10, substitute: Omit 8409.91.10, substitute:
“8409.91.10 - - - Parts, as follows: (a) carburettors, and parts thereof, not being suitable for use with motorcycles; (b) piston pins; (c) piston rings; (d) valves; (e) of engines of a kind used with vehicles or 8701.20.00, 8702, 8703, 8704 or 8705; (f) or a kind used with engines having a power not exceeding 4.5 kW of 8407.31.00, 8407.32.10 or 8407.90.20 - - - Parts, as follows: (a) carburettors, and parts thereof, not being suitable for use with motorcycles; (b) piston pins; (c) piston rings; (d) valves; (e) of engines of a kind used with vehicles or 8701.20.00, 8702, 8703, 8704 or 8705; (f) or a kind used with engines having a power not exceeding 4.5 kW of 8407.31.00, 8407.32.10 or 8407.90.20 25% DC: 20%”.
91. Omit 8409.99.10, substitute: Omit 8409.99.10, substitute: Omit 8409.99.10, substitute:
“8409.99.10 - - - Parts, as follows: (a) piston pins; (b) piston rings; (c) valves; (d) of engines of a kind used with vehicles of 8701.20.00, 8702, 8703, 8704 or 8705, but not including fuel injection equipment and parts thereof unless for use in the assembly or manufacture or those vehicles - - - Parts, as follows: (a) piston pins; (b) piston rings; (c) valves; (d) of engines of a kind used with vehicles of 8701.20.00, 8702, 8703, 8704 or 8705, but not including fuel injection equipment and parts thereof unless for use in the assembly or manufacture or those vehicles 25% DC: 20%”.
92. Omit 8414.40.00, substitute: Omit 8414.40.00, substitute: Omit 8414.40.00, substitute:
“8414.40 - Air compressors mounted on a wheeled chassis for towing: - Air compressors mounted on a wheeled chassis for towing:
8414.40.10 - - - Reciprocating or rotary, having a capacity not exceeding 3m3 or free air delivered per minute - - - Reciprocating or rotary, having a capacity not exceeding 3m3 or free air delivered per minute 25% DC: 20%
8414.40.20 - - - Reciprocating or rotary, having a capacity exceeding 3m3 but not exceeding 25m3 or free air delivered per minute - - - Reciprocating or rotary, having a capacity exceeding 3m3 but not exceeding 25m3 or free air delivered per minute 15% DC: 10%
8414.40.90 - - - Other - - - Other 2%”.

SCHEDULE—continued
93. Omit 8414.80.00. substitute: Omit 8414.80.00. substitute: Omit 8414.80.00. substitute: Omit 8414.80.00. substitute:
“8414.80 “8414.80 - Other: - Other:
8414.80.10 8414.80.10 - - - Reciprocating or rotary air compressors or pumps, having a capacity not exceeding 3m3 of free air delivered per minute - - - Reciprocating or rotary air compressors or pumps, having a capacity not exceeding 3m3 of free air delivered per minute 25% DC: 20% 25% DC: 20%
8414.80.20 8414.80.20 - - - Reciprocating or rotary air compressors or pumps, having a capacity exceeding 3m3 but not exceeding 25m3 of free air delivered per minute - - - Reciprocating or rotary air compressors or pumps, having a capacity exceeding 3m3 but not exceeding 25m3 of free air delivered per minute 15% DC: 10% 15% DC: 10%
8414.80.90 8414.80.90 - - - Other - - - Other 2%”. 2%”.
94. Omit 8419.81.00, substitute: Omit 8419.81.00, substitute: Omit 8419.81.00, substitute: Omit 8419.81.00, substitute:
“8419.81 “8419.81 - - For making hot drinks or for cooking or heating food: - - For making hot drinks or for cooking or heating food:
8419.81.10 8419.81.10 - - - Hot drink dispensing machines - - - Hot drink dispensing machines 25% 25%
DC: 20% DC: 20%
8419.81.90 8419.81.90 - - - Other - - - Other 15% 15%
DC: 10%”. DC: 10%”.
95. Omit 8423.82.00, substitute: Omit 8423.82.00, substitute: Omit 8423.82.00, substitute: Omit 8423.82.00, substitute:
“8423.82.00 “8423.82.00 - - Having a maximum weighing capacity exceeding 30kg but not exceeding 5 000kg - - Having a maximum weighing capacity exceeding 30kg but not exceeding 5 000kg 15% DC: 10%”. 15% DC: 10%”.
96. Omit 8432, substitute: Omit 8432, substitute: Omit 8432, substitute: Omit 8432, substitute:
“8432 “8432 AGRICULTURAL, HORTICULTURAL OR FORESTRY MACHINERY FOR SOIL PREPARATION OR CULTIVATION; LAWN OR SPORTS-GROUND ROLLERS: AGRICULTURAL, HORTICULTURAL OR FORESTRY MACHINERY FOR SOIL PREPARATION OR CULTIVATION; LAWN OR SPORTS-GROUND ROLLERS:
8432.10.00 8432.10.00 - Ploughs - Ploughs Free Free
8432.2 8432.2 - Harrows, scarifiers, cultivators, weeders and hoes: - Harrows, scarifiers, cultivators, weeders and hoes:
8432.21.00 8432.21.00 - - Disc harrows - - Disc harrows Free Free
8432.29.00 8432.29.00 - - Other - - Other Free Free
8432.30.00 8432.30.00 - Seeders, planters and transplanters - Seeders, planters and transplanters Free Free
8432.40.00 8432.40.00 - Manure spreaders and fertilizer distributors - Manure spreaders and fertilizer distributors Free Free
8432.80.00 8432.80.00 - Other machinery - Other machinery Free Free
8432.90.00 8432.90.00 - Parts - Parts Free”. Free”.
97. Omit 8438.90.10, substitute: Omit 8438.90.10, substitute: Omit 8438.90.10, substitute: Omit 8438.90.10, substitute:
“8438.90.10 “8438.90.10 - - - Of machinery of 8438.10. 8438.20.00, 8438.30.00 or 8438.40.00 - - - Of machinery of 8438.10. 8438.20.00, 8438.30.00 or 8438.40.00 15% DC: 10%”. 15% DC: 10%”.
98. Omit 8482.40.10, substitute: Omit 8482.40.10, substitute: Omit 8482.40.10, substitute: Omit 8482.40.10, substitute:
“8482.40.10 “8482.40.10 - - - For propeller shaft universal joints of a kind used with vehicles of 8701.20.00, 8702, 8703, 8704 or 8705 25% DC: 20% CAN: 17.5%”. 25% DC: 20% CAN: 17.5%”. 25% DC: 20% CAN: 17.5%”.
99. Omit 8541.40.00, substitute: Omit 8541.40.00, substitute: Omit 8541.40.00, substitute: Omit 8541.40.00, substitute:
“8541.40 - Photosensitive semiconductor devices, including photovoltaic cells whether or not assembled in modules or made up into panels; light emitting diodes: - Photosensitive semiconductor devices, including photovoltaic cells whether or not assembled in modules or made up into panels; light emitting diodes: - Photosensitive semiconductor devices, including photovoltaic cells whether or not assembled in modules or made up into panels; light emitting diodes:
8541.40.10 - - - Goods, as follows: (a) assembled solar arrays; (b) solar cells - - - Goods, as follows: (a) assembled solar arrays; (b) solar cells - - - Goods, as follows: (a) assembled solar arrays; (b) solar cells 20% DC: 15% 20% DC: 15%
8541.40.90 - - - Other - - - Other - - - Other 2%”. 2%”.
100. Omit Additional Notes 4 and 5 to Chapter 87, substitute: “4.-For the purposes of 8702 to 8704 ‘off-road vehicles’ means vehicles that have at least four of the following characteristics calculated when the vehicle is at its unladen mass (i.e., vehicle in running order, unoccupied and unladen with all fluid reservoirs including fuel, filled to normal capacity and with all standard equipment) on a level surface, with the front wheels parallel to the vehicle’s longitudinal centreline, and the tyres inflated to the manufacturer’s recommended pressure— (a) Approach angle of not less than 28 degrees - the approach angle is the smallest angle, in the side view of a vehicle, formed by the level surface on which the vehicle is standing and a line tangent to the front tyre ‘Static Loaded Tyre Radius’ arc and touching the underside of the vehicle forward of the front tyre; (b) Breakover angle of not less than 14 degrees - the breakover angle is the supplement of largest angle, in the side view of a vehicle, that can be formed by two lines tangent to the front and rear ‘Static Loaded Tyre Radius’ arcs and intersecting at a point on the underside of the vehicle; (c) Departure angle of not less than 20 degrees - the departure angle is the smallest angle, in the side view of a vehicle, formed by the level surface on which the vehicle is standing and a line Omit Additional Notes 4 and 5 to Chapter 87, substitute: “4.-For the purposes of 8702 to 8704 ‘off-road vehicles’ means vehicles that have at least four of the following characteristics calculated when the vehicle is at its unladen mass (i.e., vehicle in running order, unoccupied and unladen with all fluid reservoirs including fuel, filled to normal capacity and with all standard equipment) on a level surface, with the front wheels parallel to the vehicle’s longitudinal centreline, and the tyres inflated to the manufacturer’s recommended pressure— (a) Approach angle of not less than 28 degrees - the approach angle is the smallest angle, in the side view of a vehicle, formed by the level surface on which the vehicle is standing and a line tangent to the front tyre ‘Static Loaded Tyre Radius’ arc and touching the underside of the vehicle forward of the front tyre; (b) Breakover angle of not less than 14 degrees - the breakover angle is the supplement of largest angle, in the side view of a vehicle, that can be formed by two lines tangent to the front and rear ‘Static Loaded Tyre Radius’ arcs and intersecting at a point on the underside of the vehicle; (c) Departure angle of not less than 20 degrees - the departure angle is the smallest angle, in the side view of a vehicle, formed by the level surface on which the vehicle is standing and a line Omit Additional Notes 4 and 5 to Chapter 87, substitute: “4.-For the purposes of 8702 to 8704 ‘off-road vehicles’ means vehicles that have at least four of the following characteristics calculated when the vehicle is at its unladen mass (i.e., vehicle in running order, unoccupied and unladen with all fluid reservoirs including fuel, filled to normal capacity and with all standard equipment) on a level surface, with the front wheels parallel to the vehicle’s longitudinal centreline, and the tyres inflated to the manufacturer’s recommended pressure— (a) Approach angle of not less than 28 degrees - the approach angle is the smallest angle, in the side view of a vehicle, formed by the level surface on which the vehicle is standing and a line tangent to the front tyre ‘Static Loaded Tyre Radius’ arc and touching the underside of the vehicle forward of the front tyre; (b) Breakover angle of not less than 14 degrees - the breakover angle is the supplement of largest angle, in the side view of a vehicle, that can be formed by two lines tangent to the front and rear ‘Static Loaded Tyre Radius’ arcs and intersecting at a point on the underside of the vehicle; (c) Departure angle of not less than 20 degrees - the departure angle is the smallest angle, in the side view of a vehicle, formed by the level surface on which the vehicle is standing and a line Omit Additional Notes 4 and 5 to Chapter 87, substitute: “4.-For the purposes of 8702 to 8704 ‘off-road vehicles’ means vehicles that have at least four of the following characteristics calculated when the vehicle is at its unladen mass (i.e., vehicle in running order, unoccupied and unladen with all fluid reservoirs including fuel, filled to normal capacity and with all standard equipment) on a level surface, with the front wheels parallel to the vehicle’s longitudinal centreline, and the tyres inflated to the manufacturer’s recommended pressure— (a) Approach angle of not less than 28 degrees - the approach angle is the smallest angle, in the side view of a vehicle, formed by the level surface on which the vehicle is standing and a line tangent to the front tyre ‘Static Loaded Tyre Radius’ arc and touching the underside of the vehicle forward of the front tyre; (b) Breakover angle of not less than 14 degrees - the breakover angle is the supplement of largest angle, in the side view of a vehicle, that can be formed by two lines tangent to the front and rear ‘Static Loaded Tyre Radius’ arcs and intersecting at a point on the underside of the vehicle; (c) Departure angle of not less than 20 degrees - the departure angle is the smallest angle, in the side view of a vehicle, formed by the level surface on which the vehicle is standing and a line Omit Additional Notes 4 and 5 to Chapter 87, substitute: “4.-For the purposes of 8702 to 8704 ‘off-road vehicles’ means vehicles that have at least four of the following characteristics calculated when the vehicle is at its unladen mass (i.e., vehicle in running order, unoccupied and unladen with all fluid reservoirs including fuel, filled to normal capacity and with all standard equipment) on a level surface, with the front wheels parallel to the vehicle’s longitudinal centreline, and the tyres inflated to the manufacturer’s recommended pressure— (a) Approach angle of not less than 28 degrees - the approach angle is the smallest angle, in the side view of a vehicle, formed by the level surface on which the vehicle is standing and a line tangent to the front tyre ‘Static Loaded Tyre Radius’ arc and touching the underside of the vehicle forward of the front tyre; (b) Breakover angle of not less than 14 degrees - the breakover angle is the supplement of largest angle, in the side view of a vehicle, that can be formed by two lines tangent to the front and rear ‘Static Loaded Tyre Radius’ arcs and intersecting at a point on the underside of the vehicle; (c) Departure angle of not less than 20 degrees - the departure angle is the smallest angle, in the side view of a vehicle, formed by the level surface on which the vehicle is standing and a line

SCHEDULE—continued
tangent to the rear tyre “Static Loaded Tyre Radius’ arc and touching the underside of the vehicle rearward of the rear tyre; (d) Running clearance of not less than 200 mm - the distance from the surface on which a vehicle is standing to the lowest point on the vehicle excluding unsprung mast; (e) Front and rear axle or suspension clearances of not lot than 173 mm each - front axle and rear axle clearance it the vertical distance from the level surface on which the vehicle is standing to the lowest point on the ‘axle’ differential (when applicable in case of a front ‘axle’) of the vehicle; - suspension clearance is the minimum distance measured from the front and rear suspensions to the ground. 5-For the purposes of 8704.21.10 and 8704.31.10, ‘variants of motor cars or station wagons’ means panel vans or like vehicles that have either a front end contour structure identical to that used in a motor car or station wagon of a particular kind or a front end contour structure and engine generally similar to those used in a motor car or station wagon of a particular kind. 6.-Heading 8708 does not cover textile mats or textile carpets (Chapter 37). 7.-For the purposes of this Chapter ‘g.v.w.’ (gross vehicle weight) is the road weight specified by the manufacturer as being the maximum design weight capacity of the vehicle. This weight is the combined weight of the vehicle, the maximum specified load, the driver and a tank full of fuel.”. tangent to the rear tyre “Static Loaded Tyre Radius’ arc and touching the underside of the vehicle rearward of the rear tyre; (d) Running clearance of not less than 200 mm - the distance from the surface on which a vehicle is standing to the lowest point on the vehicle excluding unsprung mast; (e) Front and rear axle or suspension clearances of not lot than 173 mm each - front axle and rear axle clearance it the vertical distance from the level surface on which the vehicle is standing to the lowest point on the ‘axle’ differential (when applicable in case of a front ‘axle’) of the vehicle; - suspension clearance is the minimum distance measured from the front and rear suspensions to the ground. 5-For the purposes of 8704.21.10 and 8704.31.10, ‘variants of motor cars or station wagons’ means panel vans or like vehicles that have either a front end contour structure identical to that used in a motor car or station wagon of a particular kind or a front end contour structure and engine generally similar to those used in a motor car or station wagon of a particular kind. 6.-Heading 8708 does not cover textile mats or textile carpets (Chapter 37). 7.-For the purposes of this Chapter ‘g.v.w.’ (gross vehicle weight) is the road weight specified by the manufacturer as being the maximum design weight capacity of the vehicle. This weight is the combined weight of the vehicle, the maximum specified load, the driver and a tank full of fuel.”. tangent to the rear tyre “Static Loaded Tyre Radius’ arc and touching the underside of the vehicle rearward of the rear tyre; (d) Running clearance of not less than 200 mm - the distance from the surface on which a vehicle is standing to the lowest point on the vehicle excluding unsprung mast; (e) Front and rear axle or suspension clearances of not lot than 173 mm each - front axle and rear axle clearance it the vertical distance from the level surface on which the vehicle is standing to the lowest point on the ‘axle’ differential (when applicable in case of a front ‘axle’) of the vehicle; - suspension clearance is the minimum distance measured from the front and rear suspensions to the ground. 5-For the purposes of 8704.21.10 and 8704.31.10, ‘variants of motor cars or station wagons’ means panel vans or like vehicles that have either a front end contour structure identical to that used in a motor car or station wagon of a particular kind or a front end contour structure and engine generally similar to those used in a motor car or station wagon of a particular kind. 6.-Heading 8708 does not cover textile mats or textile carpets (Chapter 37). 7.-For the purposes of this Chapter ‘g.v.w.’ (gross vehicle weight) is the road weight specified by the manufacturer as being the maximum design weight capacity of the vehicle. This weight is the combined weight of the vehicle, the maximum specified load, the driver and a tank full of fuel.”. tangent to the rear tyre “Static Loaded Tyre Radius’ arc and touching the underside of the vehicle rearward of the rear tyre; (d) Running clearance of not less than 200 mm - the distance from the surface on which a vehicle is standing to the lowest point on the vehicle excluding unsprung mast; (e) Front and rear axle or suspension clearances of not lot than 173 mm each - front axle and rear axle clearance it the vertical distance from the level surface on which the vehicle is standing to the lowest point on the ‘axle’ differential (when applicable in case of a front ‘axle’) of the vehicle; - suspension clearance is the minimum distance measured from the front and rear suspensions to the ground. 5-For the purposes of 8704.21.10 and 8704.31.10, ‘variants of motor cars or station wagons’ means panel vans or like vehicles that have either a front end contour structure identical to that used in a motor car or station wagon of a particular kind or a front end contour structure and engine generally similar to those used in a motor car or station wagon of a particular kind. 6.-Heading 8708 does not cover textile mats or textile carpets (Chapter 37). 7.-For the purposes of this Chapter ‘g.v.w.’ (gross vehicle weight) is the road weight specified by the manufacturer as being the maximum design weight capacity of the vehicle. This weight is the combined weight of the vehicle, the maximum specified load, the driver and a tank full of fuel.”.
101. 101. Omit 8702.10.20, substitute: Omit 8702.10.20, substitute:
“8702.10.20 - - - Goods, NSA, at follows: (a) amphibious vehicles; (b) four-wheel drive vehicles, as follows: (i) vehicles incorporating an independent chassis; (ii) off-road vehicles 23% DC: 20% CAN: 17.5%”. 23% DC: 20% CAN: 17.5%”.
101 101 Omit 8702.90.20, substitute: Omit 8702.90.20, substitute:
“8702.90.20 - - - Goods, NSA, as follows: (a) amphibious vehicles; (b) four-wheel drive vehicles, as follows: (i) vehicles incorporating an independent chassis; (ii) off-road vehicles 25% DC: 20% CAN: 17.5%”. 25% DC: 20% CAN: 17.5%”.
103. 103. Omit 8703.21.10 and 8703.21.20, substitute: Omit 8703.21.10 and 8703.21.20, substitute:
“8703.21.10 - - - Motor cars and station wagons, other than: (a) amphibious vehicles; (b) forward-control vehicles; or (c) four-wheel drive vehicles, as follows: (i) vehicles incorporating an independent chassis; (ii) off-road vehicles Sch. 5 Sch. 5
8703.21.20 - - - Goods, as follows: (a) amphibious vehicles; (b) four-wheel drive vehicles, as follows: (i) vehicles incorporating an independent chassis; (ii) off-road vehicles 25% DC: 20% CAN: 17.5%”. 25% DC: 20% CAN: 17.5%”.
104. 104. Omit 8703.22.10, substitute: Omit 8703.22.10, substitute:
“8703.22.10 - - - Motor cars and station wagons, other than: (a) amphibious vehicles; (b) forward-control vehicles; or (c) four-wheel drive vehicles, as follows: (i) vehicles incorporating an independent chassis; (ii) off-road vehicles Sch. 5”. Sch. 5”.
103. 103. Omit 8703.2130, substitute: Omit 8703.2130, substitute:
“8703.2130 - - - Goods, NSA, as follows: (a) amphibious vehicles; (b) four-wheel drive vehicles, at follows: (i) vehicles incorporating an independent chassis; (ii) off-road vehicles 25% DC: 20% CAN: 17.5%”. 25% DC: 20% CAN: 17.5%”.

SCHEDULE—continued
106. Omit 8703.23.10. substitute: Omit 8703.23.10. substitute:
“8703.23.10 - - - Motor cars and station wagons, other than: (a) amphibious vehicles; (b) forward-control vehicles; or (c) four-wheel drive vehicles, as follows: (i) vehicles incorporating an independent chassis; (ii) off-road vehicles Sch. 5”.
107. Omit 8703.23.30, substitute: Omit 8703.23.30, substitute:
“8703.23.30 - - - Goods, NSA, as follows: (a) amphibious vehicles; (b) four-wheel drive vehicles, as follows: (i) vehicles incorporating an independent chassis; (ii) off-road vehicles 25% DC: 20% CAN: 17.5%”.
108. Omit 8703.24.10. substitute: Omit 8703.24.10. substitute:
“8703.24.10 - - - Motor cars and station wagons, other than: (a) amphibious vehicles; (b) forward-control vehicles; or (c) four-wheel drive vehicles, as follows: (i) vehicles incorporating an independent chassis; (ii) off-road vehicles Sch. 5”.
109. Omit 8703.24.30, substitute: Omit 8703.24.30, substitute:
“8703.24.30 - - - Goods, NSA, as follows: (a) amphibious vehicles; (b) four-wheel drive vehicles, as follows: (i) vehicles incorporating an independent chassis; (ii) off-road vehicles 25% DC: 20% CAN: 17.5%”.
110. Omit 8703.31.10, substitute: Omit 8703.31.10, substitute:
“8703.31.10 - - - Motor cars and station wagons, other than: (a) amphibious vehicles; (b) forward-control vehicles; or (c) four-wheel drive vehicles, as follows: (i) vehicles incorporating an independent chassis; (ii) off-road vehicles Sch. 5”.
III. Omit 8703.31.30, substitute: Omit 8703.31.30, substitute:
“8703.31.30 - - - Goods, NSA, as follows: (a) amphibious vehicles; (b) four-wheel drive vehicles, as follows: (i) vehicles incorporating an independent chassis; (ii) off-road vehicles 25% DC: 20% CAN: 17.5%”.
112. Omit 8703.32.10, substitute: Omit 8703.32.10, substitute:
“8703.32.10 - - - Motor cars and station wagons, other than: (a) amphibious vehicles; (b) forward-control vehicles; or (c) four-wheel drive vehicles, as follows: (i) vehicles incorporating an independent chassis; (ii) off-road vehicles Sch. 5”.
113. Omit 8703.32.30, substitute: Omit 8703.32.30, substitute:
“8703.32.30 - - - Goods. NSA, as follows: (a) amphibious vehicles; (b) four-wheel drive vehicles, as follows: (i) vehicles incorporating an independent chassis; (ii) off-road vehicles 25% DC: 20% CAN: 17.5%”.
114. Omit 8703.33.10. substitute: Omit 8703.33.10. substitute:
“8703.33.10 - - - Motor cars and station wagons, other than: (a) amphibious vehicles; (b) forward-control vehicles; or (c) four-wheel drive vehicles, as follows: (i) vehicles incorporating an independent chassis; (ii) off-road vehicles Sch. 5”.

SCHEDULE—continued
115. Omit 8703.33.30, substitute: Omit 8703.33.30, substitute:
“8703.33.30 - - - Goods, NSA, as follows: (a) amphibious vehicles; (b) four-wheel drive vehicles, as follows: (i) vehicles incorporating an independent chassis; (ii) off-road vehicles 25% DC: 20% CAN: 17.5%”.
116. Omit 8703.90.10, substitute: Omit 8703.90.10, substitute:
“8703.90.10 - - - Motor cars and station wagons, other than: (a) amphibious vehicles; (b) battery operated vehicles; (c) forward-control vehicles; or (d) four-wheel drive vehicles, as follows: (i) vehicles incorporating an independent chassis; (ii) off-road vehicles Sch. 5”.
117. Omit 8703.90.30, substitute: Omit 8703.90.30, substitute:
“8703.90.30 - - - Goods, NSA, as follows: (a) amphibious vehicles; (b) battery operated vehicles; (c) four-wheel drive vehicles, as follows: (i) vehicles incorporating an independent chassis; (ii) off-road vehicles 25% DC: 20% CAN: 17.5%”.
118. Omit 8704.21.10, substitute: Omit 8704.21.10, substitute:
‘“8704.21.10 - - - Variants of motor cars or station wagons, other than: (a) amphibious vehicles; (b) forward-control vehicles; or (c) four-wheel drive vehicles, as follows: (i) vehicles incorporating an independent chassis; (ii) off-road vehicles Sch. 5”.
119. Omit 8704.21.30, substitute: Omit 8704.21.30, substitute:
“8704.21.30 - - - Goods, NSA. as follows: (a) amphibious vehicles; (b) four-wheel drive vehicles, as follows: (i) utilities or pick-ups; (ii) other vehicles incorporating an independent chassis; (iii) off-road vehicles 25% DC: 20% CAN: 17.5%”.
120. Omit 8704.31.10, substitute: Omit 8704.31.10, substitute:
“8704.31.10 - - - Variants of motor cars or station wagons, other than: (a) amphibious vehicles; (b) forward-control vehicles; or (c) four-wheel drive vehicles, as follows: (i) vehicles incorporating an independent chassis; (ii) off-road vehicles Sch. 5”.
121. Omit 8704.31.30, substitute: Omit 8704.31.30, substitute:
“8704.31.30 - - - Goods, NSA, as follows: (a) amphibious vehicles; (b) four-wheel drive vehicles, as follows: (i) utilities or pick-ups; (ii) other vehicles incorporating an independent chassis; (iii) off-road vehicles 25% DC: 20% CAN: 17.5%”.
122. Omit 8707.10.10, substitute: Omit 8707.10.10, substitute:
“8707.10.10 - - - For use in the assembly or manufacture of vehicles of 8703.21.10, 8703.22.10, 8703.23.10, 8703.24.10, 8703.31.10, 8703.32.10. 8703.33.10 or 8703.90.10 85% NZ: 80% FI: 80% DC: 80% CAN: 77.5%
From 1 January 1989 80% NZ: 80% FI: 75% DC: 75% CAN: 72.5%
From 1 January 1990 72.5% NZ: 72.5% FI: 67.5% DC: 67.5% CAN: 65%

SCHEDULE—continued
From 1 January 1991 From 1 January 1991 From 1 January 1991 From 1 January 1991 65%
NZ: 65%
FI: 60%
DC: 60%
CAN: 57.5%
From 1 January 1992 From 1 January 1992 From 1 January 1992 From 1 January 1992 57.5%
NZ: 57.5%
FI: 52.5%
DC: 52.5%
CAN: 50%”.
123. Omit 8714.19.00. substitute: Omit 8714.19.00. substitute: Omit 8714.19.00. substitute: Omit 8714.19.00. substitute: Omit 8714.19.00. substitute: Omit 8714.19.00. substitute: Omit 8714.19.00. substitute:
“8714.19 “8714.19 “8714.19 - Other: - Other: - Other: - Other:
8714.19.10 8714.19.10 8714.19.10 - - - Exhaust systems and parts thereof - - - Exhaust systems and parts thereof - - - Exhaust systems and parts thereof - - - Exhaust systems and parts thereof 20%
DC: 15%
8714.19.90 8714.19.90 8714.19.90 Other Other Other Other 2%”.
124. After Additional Note 1 to Chapter 90 add: After Additional Note 1 to Chapter 90 add: After Additional Note 1 to Chapter 90 add: After Additional Note 1 to Chapter 90 add: After Additional Note 1 to Chapter 90 add: After Additional Note 1 to Chapter 90 add: After Additional Note 1 to Chapter 90 add:
“2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”. “2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”. “2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”. “2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”. “2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”. “2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”. “2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”.
“2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”. “2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”. “2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”. “2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”. “2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”. “2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”. “2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”.
“2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”. “2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”. “2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”. “2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”. “2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”. “2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”. “2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”.
“2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”. “2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”. “2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”. “2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”. “2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”. “2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”. “2.-This Chapter does not cover gas pressure regulators (so called) of the piston or diaphragm type, of a kind used with compressed gas cylinders or reticulated gas pipeline systems, incorporating a pressure reducing valve or the like, whether or not combined with a pressure gauge (8481).”.
125. Omit 9031.90.20, substitute: Omit 9031.90.20, substitute: Omit 9031.90.20, substitute: Omit 9031.90.20, substitute: Omit 9031.90.20, substitute: Omit 9031.90.20, substitute: Omit 9031.90.20, substitute:
“9031.90.20 “9031.90.20 “9031.90.20 - - - For goods of 9031.10.11, 9031.20.10 or 9031.80.10 - - - For goods of 9031.10.11, 9031.20.10 or 9031.80.10 - - - For goods of 9031.10.11, 9031.20.10 or 9031.80.10 - - - For goods of 9031.10.11, 9031.20.10 or 9031.80.10 20%
DC: 15%”.
126. Omit 9302.00.00, substitute: Omit 9302.00.00, substitute: Omit 9302.00.00, substitute: Omit 9302.00.00, substitute: Omit 9302.00.00, substitute: Omit 9302.00.00, substitute: Omit 9302.00.00, substitute:
“9302.00.00 “9302.00.00 “9302.00.00 REVOLVERS AND PISTOLS, OTHER THAN THOSE OF 9303 OR 9304.00.00 REVOLVERS AND PISTOLS, OTHER THAN THOSE OF 9303 OR 9304.00.00 REVOLVERS AND PISTOLS, OTHER THAN THOSE OF 9303 OR 9304.00.00 REVOLVERS AND PISTOLS, OTHER THAN THOSE OF 9303 OR 9304.00.00 2%”.
REVOLVERS AND PISTOLS, OTHER THAN THOSE OF 9303 OR 9304.00.00 REVOLVERS AND PISTOLS, OTHER THAN THOSE OF 9303 OR 9304.00.00 REVOLVERS AND PISTOLS, OTHER THAN THOSE OF 9303 OR 9304.00.00 REVOLVERS AND PISTOLS, OTHER THAN THOSE OF 9303 OR 9304.00.00
127. Omit 9304.00.00, substitute: Omit 9304.00.00, substitute: Omit 9304.00.00, substitute: Omit 9304.00.00, substitute: Omit 9304.00.00, substitute: Omit 9304.00.00, substitute: Omit 9304.00.00, substitute:
“9304.00.00 “9304.00.00 “9304.00.00 OTHER ARMS (FOR EXAMPLE, SPRING, AIR OR GAS GUNS AND PISTOLS, TRUNCHEONS), EXCLUDING THOSE OF 9307.00.00 OTHER ARMS (FOR EXAMPLE, SPRING, AIR OR GAS GUNS AND PISTOLS, TRUNCHEONS), EXCLUDING THOSE OF 9307.00.00 OTHER ARMS (FOR EXAMPLE, SPRING, AIR OR GAS GUNS AND PISTOLS, TRUNCHEONS), EXCLUDING THOSE OF 9307.00.00 OTHER ARMS (FOR EXAMPLE, SPRING, AIR OR GAS GUNS AND PISTOLS, TRUNCHEONS), EXCLUDING THOSE OF 9307.00.00 2%”.
OTHER ARMS (FOR EXAMPLE, SPRING, AIR OR GAS GUNS AND PISTOLS, TRUNCHEONS), EXCLUDING THOSE OF 9307.00.00 OTHER ARMS (FOR EXAMPLE, SPRING, AIR OR GAS GUNS AND PISTOLS, TRUNCHEONS), EXCLUDING THOSE OF 9307.00.00 OTHER ARMS (FOR EXAMPLE, SPRING, AIR OR GAS GUNS AND PISTOLS, TRUNCHEONS), EXCLUDING THOSE OF 9307.00.00 OTHER ARMS (FOR EXAMPLE, SPRING, AIR OR GAS GUNS AND PISTOLS, TRUNCHEONS), EXCLUDING THOSE OF 9307.00.00
128. Omit 9306.10.00. substitute: Omit 9306.10.00. substitute: Omit 9306.10.00. substitute: Omit 9306.10.00. substitute: Omit 9306.10.00. substitute: Omit 9306.10.00. substitute: Omit 9306.10.00. substitute:
“9306.10.00 “9306.10.00 “9306.10.00 - Cartridges for riveting or similar tools or for captive-bolt humane killers and parts thereof - Cartridges for riveting or similar tools or for captive-bolt humane killers and parts thereof - Cartridges for riveting or similar tools or for captive-bolt humane killers and parts thereof - Cartridges for riveting or similar tools or for captive-bolt humane killers and parts thereof 20%
- Cartridges for riveting or similar tools or for captive-bolt humane killers and parts thereof - Cartridges for riveting or similar tools or for captive-bolt humane killers and parts thereof - Cartridges for riveting or similar tools or for captive-bolt humane killers and parts thereof - Cartridges for riveting or similar tools or for captive-bolt humane killers and parts thereof DC: 15%”.
129. Omit 9306.30.00, substitute: Omit 9306.30.00, substitute: Omit 9306.30.00, substitute: Omit 9306.30.00, substitute: Omit 9306.30.00, substitute: Omit 9306.30.00, substitute: Omit 9306.30.00, substitute:
“9306.30.00 “9306.30.00 “9306.30.00 - Other cartridges and parts thereof - Other cartridges and parts thereof - Other cartridges and parts thereof - Other cartridges and parts thereof 20%
DC: 15%”.
130. Omit Note 2 to Chapter 97, substitute: Omit Note 2 to Chapter 97, substitute: Omit Note 2 to Chapter 97, substitute: Omit Note 2 to Chapter 97, substitute: Omit Note 2 to Chapter 97, substitute: Omit Note 2 to Chapter 97, substitute: Omit Note 2 to Chapter 97, substitute:
“2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”. “2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”. “2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”. “2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”. “2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”. “2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”. “2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”.
“2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”. “2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”. “2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”. “2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”. “2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”. “2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”. “2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”.
“2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”. “2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”. “2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”. “2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”. “2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”. “2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”. “2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”.
“2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”. “2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”. “2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”. “2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”. “2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”. “2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”. “2.-For the purposes of 9702.00.00, ‘original engravings, prints and lithographs’ means impressions produced directly, in black and white or in colour, of one or of several plates wholly executed by hand by the artist, irrespective of the process or of the material employed by the artist, but not including any mechanical or photomechanical process.”.
Amendment of Part I of Schedule 4 Amendment of Part I of Schedule 4 Amendment of Part I of Schedule 4 Amendment of Part I of Schedule 4 Amendment of Part I of Schedule 4 Amendment of Part I of Schedule 4 Amendment of Part I of Schedule 4 Amendment of Part I of Schedule 4
Omit item 16. Omit item 16. Omit item 16. Omit item 16.
Amendments of Part III of Schedule 4 Amendments of Part III of Schedule 4 Amendments of Part III of Schedule 4 Amendments of Part III of Schedule 4 Amendments of Part III of Schedule 4 Amendments of Part III of Schedule 4 Amendments of Part III of Schedule 4 Amendments of Part III of Schedule 4
1. Omit items 36 to 38, substitute: 1. Omit items 36 to 38, substitute: 1. Omit items 36 to 38, substitute: 1. Omit items 36 to 38, substitute: 1. Omit items 36 to 38, substitute: 1. Omit items 36 to 38, substitute: 1. Omit items 36 to 38, substitute: 1. Omit items 36 to 38, substitute:
“36a “36a Goods classified under 3503.00.10 of Schedule 3, as prescribed by by-law Goods classified under 3503.00.10 of Schedule 3, as prescribed by by-law Goods classified under 3503.00.10 of Schedule 3, as prescribed by by-law Goods classified under 3503.00.10 of Schedule 3, as prescribed by by-law Goods classified under 3503.00.10 of Schedule 3, as prescribed by by-law Goods classified under 3503.00.10 of Schedule 3, as prescribed by by-law 2%
36b 36b Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1991: Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1991: Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1991: Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1991: Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1991: Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1991: DC: 2%
Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1991: Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1991: Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1991: Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1991: Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1991: Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1991: 2%
Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1991: Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1991: Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1991: Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1991: Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1991: Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1991: DC: 2%
THE TABLE THE TABLE
1519.30.00 1519.30.00 2905.19.10 3503.00.10 3702.92.00
2827.20.00 2827.20.00 2905.29.00 3701.30.00 3702.93.00
2835.23.00 2835.23.00 2905.39.00 3701.91.00 3702.94.00
2836.20.00 2836.20.00 2912.60.00 3701.99.00 3702.95.00
2903.40.10 2903.40.10 2915.39.10 3702.32.00 3814.00.00
2905.12.00 2905.12.00 2915.70.00 3702.39.00
2905.14.00 2905.14.00 2915.90.00 3702.44.00
2905.17.00 2905.17.00 2921.45.00 3702.91.00

SCHEDULE—continued
36C 36C Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1989: Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1989: Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1989: Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1989: Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1989: Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1989: Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1989: Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1989: Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1989: Goods, as prescribed by by-law, classified under a heading or subheading of Schedule 3 specified in the Table below, entered for home consumption on or before 31 December 1989: 2% DC: 2% 2% DC: 2%
THE TABLE THE TABLE THE TABLE THE TABLE THE TABLE THE TABLE THE TABLE THE TABLE THE TABLE THE TABLE THE TABLE
2908.10.00 3902.10.00 3902.10.00 3906.10.00 3906.10.00 3916.90.00 3916.90.00
3204.15.00 3902.30.00 3902.30.00 3906.90.00 3906.90.00 3918.10.00 3918.10.00
3402.11.00 3903.20.00 3903.20.00 3907.20.00 3907.20.00 3920.10.00 3920.10.00
3402.12.00 3903.30.00 3903.30.00 3907.50.00 3907.50.00 3920.20.00 3920.20.00
3402.13.00 3903.90.00 3903.90.00 3907.91.00 3907.91.00 3920.41.00 3920.41.00
3402.19.00 3904.21.00 3904.21.00 3909.10.00 3909.10.00 3920.42.00 3920.42.00
3808.10.90 3904.22.00 3904.22.00 3909.30.00 3909.30.00 3921.90.90 3921.90.90
3901.20.00 3904.30.00 3904.30.00 3911.10.10 3911.10.10 3926.90.10 3926.90.10
3901.30.00 3904.40.00 3904.40.00
37a 37a 37a Goods classified under 3705 of Schedule 3, as prescribed by by-law Goods classified under 3705 of Schedule 3, as prescribed by by-law Goods classified under 3705 of Schedule 3, as prescribed by by-law Goods classified under 3705 of Schedule 3, as prescribed by by-law Goods classified under 3705 of Schedule 3, as prescribed by by-law Goods classified under 3705 of Schedule 3, as prescribed by by-law Goods classified under 3705 of Schedule 3, as prescribed by by-law Goods classified under 3705 of Schedule 3, as prescribed by by-law Goods classified under 3705 of Schedule 3, as prescribed by by-law Goods classified under 3705 of Schedule 3, as prescribed by by-law Free Free
37b 37b 37b Goods classified under 2815.1 of Schedule 3, as prescribed by by-law, entered Goods classified under 2815.1 of Schedule 3, as prescribed by by-law, entered Goods classified under 2815.1 of Schedule 3, as prescribed by by-law, entered Goods classified under 2815.1 of Schedule 3, as prescribed by by-law, entered Goods classified under 2815.1 of Schedule 3, as prescribed by by-law, entered Goods classified under 2815.1 of Schedule 3, as prescribed by by-law, entered Goods classified under 2815.1 of Schedule 3, as prescribed by by-law, entered Goods classified under 2815.1 of Schedule 3, as prescribed by by-law, entered Goods classified under 2815.1 of Schedule 3, as prescribed by by-law, entered Goods classified under 2815.1 of Schedule 3, as prescribed by by-law, entered Free Free
for home consumption on or before 31 December 1991 for home consumption on or before 31 December 1991 for home consumption on or before 31 December 1991 for home consumption on or before 31 December 1991 for home consumption on or before 31 December 1991 for home consumption on or before 31 December 1991 for home consumption on or before 31 December 1991 for home consumption on or before 31 December 1991 for home consumption on or before 31 December 1991 for home consumption on or before 31 December 1991
38a 38a 38a Goods classified under 3907.9 or 3908 of Schedule 3, as prescribed by by-law Goods classified under 3907.9 or 3908 of Schedule 3, as prescribed by by-law Goods classified under 3907.9 or 3908 of Schedule 3, as prescribed by by-law Goods classified under 3907.9 or 3908 of Schedule 3, as prescribed by by-law Goods classified under 3907.9 or 3908 of Schedule 3, as prescribed by by-law Goods classified under 3907.9 or 3908 of Schedule 3, as prescribed by by-law Goods classified under 3907.9 or 3908 of Schedule 3, as prescribed by by-law Goods classified under 3907.9 or 3908 of Schedule 3, as prescribed by by-law Goods classified under 3907.9 or 3908 of Schedule 3, as prescribed by by-law Goods classified under 3907.9 or 3908 of Schedule 3, as prescribed by by-law 2% 2%
38b 38b 38b Compounds that are catalysts, dispersing agents, foam stabilizers or foam modifiers, as prescribed by by-law, entered for home consumption on or before 31 December 1989 Compounds that are catalysts, dispersing agents, foam stabilizers or foam modifiers, as prescribed by by-law, entered for home consumption on or before 31 December 1989 Compounds that are catalysts, dispersing agents, foam stabilizers or foam modifiers, as prescribed by by-law, entered for home consumption on or before 31 December 1989 Compounds that are catalysts, dispersing agents, foam stabilizers or foam modifiers, as prescribed by by-law, entered for home consumption on or before 31 December 1989 Compounds that are catalysts, dispersing agents, foam stabilizers or foam modifiers, as prescribed by by-law, entered for home consumption on or before 31 December 1989 Compounds that are catalysts, dispersing agents, foam stabilizers or foam modifiers, as prescribed by by-law, entered for home consumption on or before 31 December 1989 Compounds that are catalysts, dispersing agents, foam stabilizers or foam modifiers, as prescribed by by-law, entered for home consumption on or before 31 December 1989 Compounds that are catalysts, dispersing agents, foam stabilizers or foam modifiers, as prescribed by by-law, entered for home consumption on or before 31 December 1989 Compounds that are catalysts, dispersing agents, foam stabilizers or foam modifiers, as prescribed by by-law, entered for home consumption on or before 31 December 1989 Compounds that are catalysts, dispersing agents, foam stabilizers or foam modifiers, as prescribed by by-law, entered for home consumption on or before 31 December 1989 2% DC: 2%”. 2% DC: 2%”.
2. After item 40b insert: 2. After item 40b insert: 2. After item 40b insert: 2. After item 40b insert: 2. After item 40b insert: 2. After item 40b insert: 2. After item 40b insert: 2. After item 40b insert: 2. After item 40b insert: 2. After item 40b insert: 2. After item 40b insert: 2. After item 40b insert: 2. After item 40b insert:
“40c “40c “40c Yarns, not being wool carpet yarns, for use otherwise than in the further Yarns, not being wool carpet yarns, for use otherwise than in the further Yarns, not being wool carpet yarns, for use otherwise than in the further Yarns, not being wool carpet yarns, for use otherwise than in the further Yarns, not being wool carpet yarns, for use otherwise than in the further Yarns, not being wool carpet yarns, for use otherwise than in the further Yarns, not being wool carpet yarns, for use otherwise than in the further Yarns, not being wool carpet yarns, for use otherwise than in the further Yarns, not being wool carpet yarns, for use otherwise than in the further Yarns, not being wool carpet yarns, for use otherwise than in the further 2%”. 2%”.
manufacture of yarns, as prescribed by by-law manufacture of yarns, as prescribed by by-law manufacture of yarns, as prescribed by by-law manufacture of yarns, as prescribed by by-law manufacture of yarns, as prescribed by by-law manufacture of yarns, as prescribed by by-law manufacture of yarns, as prescribed by by-law manufacture of yarns, as prescribed by by-law manufacture of yarns, as prescribed by by-law manufacture of yarns, as prescribed by by-law
Amendments of Schedule 5 Amendments of Schedule 5 Amendments of Schedule 5 Amendments of Schedule 5 Amendments of Schedule 5 Amendments of Schedule 5 Amendments of Schedule 5 Amendments of Schedule 5 Amendments of Schedule 5 Amendments of Schedule 5 Amendments of Schedule 5 Amendments of Schedule 5 Amendments of Schedule 5
1. Omit subitems 5m and 5n, substitute: 1. Omit subitems 5m and 5n, substitute: 1. Omit subitems 5m and 5n, substitute: 1. Omit subitems 5m and 5n, substitute: 1. Omit subitems 5m and 5n, substitute: 1. Omit subitems 5m and 5n, substitute: 1. Omit subitems 5m and 5n, substitute: 1. Omit subitems 5m and 5n, substitute: 1. Omit subitems 5m and 5n, substitute: 1. Omit subitems 5m and 5n, substitute: 1. Omit subitems 5m and 5n, substitute: 1. Omit subitems 5m and 5n, substitute: 1. Omit subitems 5m and 5n, substitute:
“5v - Of deerskin leather, lambskin leather or sheepskin leather, other than of full grain leather - Of deerskin leather, lambskin leather or sheepskin leather, other than of full grain leather - Of deerskin leather, lambskin leather or sheepskin leather, other than of full grain leather - Of deerskin leather, lambskin leather or sheepskin leather, other than of full grain leather - Of deerskin leather, lambskin leather or sheepskin leather, other than of full grain leather - Of deerskin leather, lambskin leather or sheepskin leather, other than of full grain leather - Of deerskin leather, lambskin leather or sheepskin leather, other than of full grain leather - Of deerskin leather, lambskin leather or sheepskin leather, other than of full grain leather - Of deerskin leather, lambskin leather or sheepskin leather, other than of full grain leather - Of deerskin leather, lambskin leather or sheepskin leather, other than of full grain leather - Of deerskin leather, lambskin leather or sheepskin leather, other than of full grain leather - Of deerskin leather, lambskin leather or sheepskin leather, other than of full grain leather 125% 125%
FI: 115% FI: 115%
DC: 115% DC: 115%
5w - Other - Other - Other - Other - Other - Other - Other - Other - Other - Other - Other - Other 125% 125%
NZ: 90% NZ: 90%
FI: 115% FI: 115%
DC: 115%” DC: 115%”
2. Omit item 29, substitute: 2. Omit item 29, substitute: 2. Omit item 29, substitute: 2. Omit item 29, substitute: 2. Omit item 29, substitute: 2. Omit item 29, substitute:
“29 Woven fabrics, containing 20% or more by weight of man-made fibres, other than polyolefin fabrics, being goods classified under a heading or subheading of Schedule 3 specified in the Table below: “29 Woven fabrics, containing 20% or more by weight of man-made fibres, other than polyolefin fabrics, being goods classified under a heading or subheading of Schedule 3 specified in the Table below: “29 Woven fabrics, containing 20% or more by weight of man-made fibres, other than polyolefin fabrics, being goods classified under a heading or subheading of Schedule 3 specified in the Table below: “29 Woven fabrics, containing 20% or more by weight of man-made fibres, other than polyolefin fabrics, being goods classified under a heading or subheading of Schedule 3 specified in the Table below: “29 Woven fabrics, containing 20% or more by weight of man-made fibres, other than polyolefin fabrics, being goods classified under a heading or subheading of Schedule 3 specified in the Table below: “29 Woven fabrics, containing 20% or more by weight of man-made fibres, other than polyolefin fabrics, being goods classified under a heading or subheading of Schedule 3 specified in the Table below: “29 Woven fabrics, containing 20% or more by weight of man-made fibres, other than polyolefin fabrics, being goods classified under a heading or subheading of Schedule 3 specified in the Table below: “29 Woven fabrics, containing 20% or more by weight of man-made fibres, other than polyolefin fabrics, being goods classified under a heading or subheading of Schedule 3 specified in the Table below: “29 Woven fabrics, containing 20% or more by weight of man-made fibres, other than polyolefin fabrics, being goods classified under a heading or subheading of Schedule 3 specified in the Table below: “29 Woven fabrics, containing 20% or more by weight of man-made fibres, other than polyolefin fabrics, being goods classified under a heading or subheading of Schedule 3 specified in the Table below: “29 Woven fabrics, containing 20% or more by weight of man-made fibres, other than polyolefin fabrics, being goods classified under a heading or subheading of Schedule 3 specified in the Table below: “29 Woven fabrics, containing 20% or more by weight of man-made fibres, other than polyolefin fabrics, being goods classified under a heading or subheading of Schedule 3 specified in the Table below: “29 Woven fabrics, containing 20% or more by weight of man-made fibres, other than polyolefin fabrics, being goods classified under a heading or subheading of Schedule 3 specified in the Table below:
THE TABLE THE TABLE THE TABLE THE TABLE
5007.10.10 5007.10.10 5007.10.10 5007.10.10 5007.10.10 5007.10.10 5212.21.10 5212.21.10 5512.11.00 5512.11.00 5515.11.00 5515.11.00 5515.11.00
5007.90.10 5007.90.10 5007.90.10 5007.90.10 5007.90.10 5007.90.10 5212.22.10 5212.22.10 5512.19.00 5512.19.00 5515.12.00 5515.12.00 5515.12.00
5210.11.10 5210.11.10 5210.11.10 5210.11.10 5210.11.10 5210.11.10 5212.23.10 5212.23.10 5512.21.00 5512.21.00 5515.13.90 5515.13.90 5515.13.90
5210.12.10 5210.12.10 5210.12.10 5210.12.10 5210.12.10 5210.12.10 5212.24.10 5212.24.10 5512.29.00 5512.29.00 5515.19.00 5515.19.00 5515.19.00
5210.19.10 5210.19.10 5210.19.10 5210.19.10 5210.19.10 5210.19.10 5212.25.10 5212.25.10 5512.91.90 5512.91.90 5515.21.00 5515.21.00 5515.21.00
5210.21.10 5210.21.10 5210.21.10 5210.21.10 5210.21.10 5210.21.10 5407.10.00 5407.10.00 5512.99.90 5512.99.90 5515.22.90 5515.22.90 5515.22.90
5210.22.10 5210.22.10 5210.22.10 5210.22.10 5210.22.10 5210.22.10 5407.20.90 5407.20.90 5513.11.00 5513.11.00 5515.29.00 5515.29.00 5515.29.00
5210.29.10 5210.29.10 5210.29.10 5210.29.10 5210.29.10 5210.29.10 5407.30.90 5407.30.90 5513.12.00 5513.12.00 5515.91.90 5515.91.90 5515.91.90
5210.31.10 5210.31.10 5210.31.10 5210.31.10 5210.31.10 5210.31.10 5407.41.00 5407.41.00 5513.13.00 5513.13.00 5515.92.90 5515.92.90 5515.92.90
5210.32.10 5210.32.10 5210.32.10 5210.32.10 5210.32.10 5210.32.10 5407.42.00 5407.42.00 5513.19.90 5513.19.90 5515.99.00 5515.99.00 5515.99.00
5210.39.10 5210.39.10 5210.39.10 5210.39.10 5210.39.10 5210.39.10 5407.43.00 5407.43.00 5513.21.00 5513.21.00 5516.11.00 5516.11.00 5516.11.00
5210.41.10 5210.41.10 5210.41.10 5210.41.10 5210.41.10 5210.41.10 5407.44.00 5407.44.00 5513.22.00 5513.22.00 5516.12.00 5516.12.00 5516.12.00
5210.42.10 5210.42.10 5210.42.10 5210.42.10 5210.42.10 5210.42.10 5407.51.00 5407.51.00 5513.23.00 5513.23.00 5516.13.00 5516.13.00 5516.13.00
5210.49.10 5210.49.10 5210.49.10 5210.49.10 5210.49.10 5210.49.10 5407.52.00 5407.52.00 5513.29.00 5513.29.00 5516.14.00 5516.14.00 5516.14.00
5210.51.10 5210.51.10 5210.51.10 5210.51.10 5210.51.10 5210.51.10 5407.53.00 5407.53.00 5513.31.00 5513.31.00 5516.21.00 5516.21.00 5516.21.00
5210.52.10 5210.52.10 5210.52.10 5210.52.10 5210.52.10 5210.52.10 5407.54.00 5407.54.00 5513.32.00 5513.32.00 5516.22.00 5516.22.00 5516.22.00
5210.59.10 5210.59.10 5210.59.10 5210.59.10 5210.59.10 5210.59.10 5407.60.00 5407.60.00 5513.33.00 5513.33.00 5516.23.00 5516.23.00 5516.23.00
5211.11.10 5211.11.10 5211.11.10 5211.11.10 5211.11.10 5211.11.10 5407.71.90 5407.71.90 5513.39.00 5513.39.00 5516.24.00 5516.24.00 5516.24.00
5211.12.10 5211.12.10 5211.12.10 5211.12.10 5211.12.10 5211.12.10 5407.72.90 5407.72.90 5513.41.00 5513.41.00 5516.31.90 5516.31.90 5516.31.90
5211.19.10 5211.19.10 5211.19.10 5211.19.10 5211.19.10 5211.19.10 5407.73.90 5407.73.90 5513.42.00 5513.42.00 5516.32.90 5516.32.90 5516.32.90
5211.21.10 5211.21.10 5211.21.10 5211.21.10 5211.21.10 5211.21.10 5407.74.00 5407.74.00 5513.43.00 5513.43.00 5516.33.90 5516.33.90 5516.33.90
5211.22.10 5211.22.10 5211.22.10 5211.22.10 5211.22.10 5211.22.10 5407.81.00 5407.81.00 5513.49.00 5513.49.00 5516.34.90 5516.34.90 5516.34.90
5211.29.10 5211.29.10 5211.29.10 5211.29.10 5211.29.10 5211.29.10 5407.82.00 5407.82.00 5514.11.00 5514.11.00 5516.41.00 5516.41.00 5516.41.00
5211.31.10 5211.31.10 5211.31.10 5211.31.10 5211.31.10 5211.31.10 5407.83.00 5407.83.00 5514.12.00 5514.12.00 5516.42.00 5516.42.00 5516.42.00
5211.32.10 5211.32.10 5211.32.10 5211.32.10 5211.32.10 5211.32.10 5407.84.00 5407.84.00 5514.13.00 5514.13.00 5516.43.00 5516.43.00 5516.43.00
5211.39.10 5211.39.10 5211.39.10 5211.39.10 5211.39.10 5211.39.10 5407.91.90 5407.91.90 5514.19.00 5514.19.00 5516.44.00 5516.44.00 5516.44.00
5211.41.10 5211.41.10 5211.41.10 5211.41.10 5211.41.10 5211.41.10 5407.92.90 5407.92.90 5514.21.00 5514.21.00 5516.91.00 5516.91.00 5516.91.00
5511.42.10 5511.42.10 5511.42.10 5511.42.10 5511.42.10 5511.42.10 5407.93.90 5407.93.90 5514.22.00 5514.22.00 5516.92.00 5516.92.00 5516.92.00
5511.43.10 5511.43.10 5511.43.10 5511.43.10 5511.43.10 5511.43.10 5407.94.90 5407.94.90 5514.23.00 5514.23.00 5516.93.00 5516.93.00 5516.93.00
5511.49.10 5511.49.10 5511.49.10 5511.49.10 5511.49.10 5511.49.10 5408.10.00 5408.10.00 5514.29.00 5514.29.00 5516.94.00 5516.94.00 5516.94.00

SCHEDULE—continued
5211.51.10 5408.21.00 5514.31.00 5801.21.10
5211.52.10 5408.22.00 5514.32.00 5801.31.00
5211.59.10 5408.23.00 5514.33.00 5803.90.10
5212.11.10 5408.24.00 551 4.39.00 5811.00.90
5212.12.10 5408.31.90 5514.41.00 5903.10.10
5212.13.10 5408.32.90 5514.42.00 5903.20.10
5212.14.10 5408.33.90 5514.43.00 5903.90.10
5212.15.10 5408.34.90 5514.49.00 5905.00.29
29a - Handicrafts to which this Schedule applies, as prescribed by by-law - Handicrafts to which this Schedule applies, as prescribed by by-law - Handicrafts to which this Schedule applies, as prescribed by by-law - Handicrafts to which this Schedule applies, as prescribed by by-law Free
29b - Goods, as prescribed by by-law - Goods, as prescribed by by-law - Goods, as prescribed by by-law - Goods, as prescribed by by-law 40%
- Goods, as prescribed by by-law - Goods, as prescribed by by-law - Goods, as prescribed by by-law - Goods, as prescribed by by-law DC: 30%
29m - Woven fabrics of filament yarn, not being fabrics: - Woven fabrics of filament yarn, not being fabrics: - Woven fabrics of filament yarn, not being fabrics: - Woven fabrics of filament yarn, not being fabrics: 40%. and
(a) containing wool or fine animal hair; (b) for use as linings; (c) weighing 203 g/m2 or more and containing discontinuous fibre (a) containing wool or fine animal hair; (b) for use as linings; (c) weighing 203 g/m2 or more and containing discontinuous fibre (a) containing wool or fine animal hair; (b) for use as linings; (c) weighing 203 g/m2 or more and containing discontinuous fibre (a) containing wool or fine animal hair; (b) for use as linings; (c) weighing 203 g/m2 or more and containing discontinuous fibre $1/m2
(a) containing wool or fine animal hair; (b) for use as linings; (c) weighing 203 g/m2 or more and containing discontinuous fibre (a) containing wool or fine animal hair; (b) for use as linings; (c) weighing 203 g/m2 or more and containing discontinuous fibre (a) containing wool or fine animal hair; (b) for use as linings; (c) weighing 203 g/m2 or more and containing discontinuous fibre (a) containing wool or fine animal hair; (b) for use as linings; (c) weighing 203 g/m2 or more and containing discontinuous fibre PNG: 30%, and
(a) containing wool or fine animal hair; (b) for use as linings; (c) weighing 203 g/m2 or more and containing discontinuous fibre (a) containing wool or fine animal hair; (b) for use as linings; (c) weighing 203 g/m2 or more and containing discontinuous fibre (a) containing wool or fine animal hair; (b) for use as linings; (c) weighing 203 g/m2 or more and containing discontinuous fibre (a) containing wool or fine animal hair; (b) for use as linings; (c) weighing 203 g/m2 or more and containing discontinuous fibre $1/m2
(a) containing wool or fine animal hair; (b) for use as linings; (c) weighing 203 g/m2 or more and containing discontinuous fibre (a) containing wool or fine animal hair; (b) for use as linings; (c) weighing 203 g/m2 or more and containing discontinuous fibre (a) containing wool or fine animal hair; (b) for use as linings; (c) weighing 203 g/m2 or more and containing discontinuous fibre (a) containing wool or fine animal hair; (b) for use as linings; (c) weighing 203 g/m2 or more and containing discontinuous fibre FI: 30%, and
$l/m2
DC: 30%, and
$1/m2
29n - Other 40%, and
$1/m2 NZ: $1/m2
PNG: 30%. and
$1/m2
FI: 30%, and
$1/m2
DC: 30%. and
$1/m2
3. After item 60 insert: 3. After item 60 insert:
“61 Cheese and curd, being goods classified under a heading or subheading of Schedule 3 specified in the Table below: Cheese and curd, being goods classified under a heading or subheading of Schedule 3 specified in the Table below: Cheese and curd, being goods classified under a heading or subheading of Schedule 3 specified in the Table below: Cheese and curd, being goods classified under a heading or subheading of Schedule 3 specified in the Table below:
Cheese and curd, being goods classified under a heading or subheading of Schedule 3 specified in the Table below: Cheese and curd, being goods classified under a heading or subheading of Schedule 3 specified in the Table below: Cheese and curd, being goods classified under a heading or subheading of Schedule 3 specified in the Table below: Cheese and curd, being goods classified under a heading or subheading of Schedule 3 specified in the Table below:
THE TABLE THE TABLE THE TABLE THE TABLE
0406.10.00 0406.30.00 0406.90.90
0406.20.00 0406.40.90
61a - Goods, as prescribed by by-law - Goods, as prescribed by by-law - Goods, as prescribed by by-law - Goods, as prescribed by by-law $96/t
- Goods, as prescribed by by-law - Goods, as prescribed by by-law - Goods, as prescribed by by-law - Goods, as prescribed by by-law DC: $96/t.
less 5%
61v - Other $2 100/t
DC:$2 100/t.
less 5%
From 1 July 1992 $96/t
DC: $96/t,
less 5%”.
1 NOTE

No. 82, 1987, as amended. For previous amendments, see No. 43, 1987.

[Minister’s second reading speech made in—

House of Representatives on 7 October 1987

Senate on 23 November 1987]